List 1 (See S. No. 52 of the Table)

(1) Amprolium hydrochloride

(2) Ascorbyl dipotassium 2 sulphate dihydrate

(3) Ascorbyl polyphosphate

( 4) Avilamycin

(5) Avoparcin

(6) Bovine albumin fraction

(7) Bovine somatotropin

(8) Buparvaquone

(9) Calf serum/foetal calf serum

(10) Dulbecco phosphate buffer saline medium

(11) Flavophospholipol

(12) Follicular stimulating hormone (FSH)

(13) Gonadotropin releasing hormone (GnRH)

(14) Halofuginone bromide

(15) Human chorionic gonadotropin hormone (HCG)

(16) Ivermectin

(17) Lasolacid sodium

(18) Leutinising hormone

(19) Lincomycin powder

(20) Lincospectin (bulk drug lincomycin spectinomycin 1:2)

(21) Maduramicin ammonium/ haduramycin ammonium

(22) Monensin granulated (coban premix)

(23) Ovaprim [gonadotropin releasing hormones] (GnRH) analogue with domperidone

(24) Pleuromutilin

(25) Pregnant mare serum (PMSG)

(26) Prostaglandin F2 alpha

(27) Prostaglandin

(28) Prostaglandins (PgF2 alpha)

(29) Robenidin HCl

(30) Salinomycin 12%

(31) Tiamulin hydrogen fumarate

(32) Tiamulin hydrochloride

(33) Tylan premix

(34) Tylosin tartarate/ tylosin phosphate

(35) Vaccine for fish

(36) Virginiamycin

(37) 4-hexyl resorcinol

 

List 2 ( See S. No 75 of the Table)

1. 120 MW Combined Cycle Gas Turbine Power Plant at Basin Bridge, Chennai, of Tamil Nadu Electricity Board;

2. 20 MW Power Plant of Ms Nagarjuna Electric Generating Company at Patancheru, Medak District, Andhra Pradesh ;

3. 515 MW Combined Cycle Power Plant at Hazira, Gujarat of Ms Essar Power Limited;

4. 167 MW Combined Cycle Power Plant at Vadodara of Ms Gujarat Industries Power Corporation Limited ;

5. 48 MW Combined Cycle Power Plant at Sancoale village, Mormugao District, Goa, of Ms Reliance Salgaoncar Company Limited;

6. 220 MW Barge Mounted Power Plant at Mangalore of Ms Tanir Bavi Power Company Private Limited, Bangalore;

7. 165 MW Combined Cycle Power Plant at Eloor, District Ernakulam, Kerala of Ms BSES Kerala Power Limited.

List 3 ( See S.No 80 of Table)

(1) Allopurinol

(2) Amikacin

(3) Amiodarone

(4) Amphotericin-B

(5) Amrinone

(6) Amifostine

(7) Aprotinin

(8) Atracurium besylate

(9) Baclofen

(10) Bleomycin

(11) Busulphan

(12) BCG vaccine , Iopromide, Iotrolan

(13) Carbidopa with Levodopa

(14) Cefoperazone

(15) Ceftizoxime

(16) Chlorambucil

(17)Chorionic Gonadotrophin

(18) Clindamycin

(19) Cyclophosphamide

(20) Cefpirome

(21) Dactinomycin

(22) Dacarbazine

(23) Daunorubicin

(24) Desmopressin

(25) Desferrioxamine

(26) Dimercaprol

(27) Dobutamine

(28) Dispyramide Phosphate

(29) Dopamine

(30) Disodium Pamidronate

(31) Eptifibatide

(32) Gemcitabine

(33) Glucagon

(34) Hydroxyurea

(35) Ifosfamide

(36) Isoprenaline

(37) Interferon alpha - 2b/interferon alpha- 2a/Interferon NL/ Interferon alpha NL(LNS)

(38) Isoflurane

(39) Ketamine

(40) Lactulose

(41) Levodopa (L-Dopa)

(42) Lomustine

(43) Lamivudine

(44) Letrozole

(45) Leuprolide Acetate

(46) Latanoprost

(47) Melphalan

(48) Mercaptopurine

(49) Mesna

(50) Methotrexate

(51) Methyl prednisolone

(52) Mitomycin

(53) MMR (Measles, mumps and rubella) vaccine

(54) Mustin Hydrochloride

(55) Netilmicin

(56) Naloxone

(57) Nitroglycerine

(58) Natural Micronised Progesterone

(59) Octreotide

(60) Pancuronium Bromide

(61) Pilocarpine

(62) Podophyllotoxin

(63) Piperacillin

(64) Praziquantel

(65) Pralidoxime

(66) Prazosin

(67) Protamine

(68) Quinidine

(69) Sodium Cromoglycate spincaps and cartridges

(70) Sodium Hyalauronate sterile 1% and 1.4% solution

(71) Somatostatin

(72) Somatropin

(73) Streptokinase and Streptodomase preparations

(74) Strontium Chloride (85 Sr.)

(75) Thioguanine

(76) Tobramycin

(77) Tissue Plasminogen Activator

(78) Tetanus Immunoglobin

(79) Typhoid Vaccines :

  1. VI Antigen of Salmonella Typhi, and

  2. (ii) Ty 2la cells and attenuated non-pathogenic strains of S. Typhi

(80) Tretinoin

(81) Tribavirin/Ribavirin

(82) Urokinase

(83) Ursodeoxycholic Acid

(84) Vancomycin

(85) Vasopressin

(86) Vecuronium Bromide

(87) Zidovudine

(88) 5-Fluorouracil

List 4 (See S. No. 83 and 403 of the Table)

(1) Abciximab

(2) Aurothiomalate Sodium

(3) Asparaginase

(4) Agglutinating Sera

(5) Anti-Diphtheria Normal Human Immunoglobulin

(6) Anti-Haeomophilic Factor concentrate(VIII and IX)

(7) Anti-human lymophocyte immunoglobulin IV

(8) Anti-human thymocyte immunoglobulin IV

(9) Anti-Pertussis Normal Human Immunoglobulin

(10) Anti-Plague serum

(11) Anti-Pseudomonas Normal Human Immunoglobulin

(12) Anti-Rabies Normal Human Immunoglobulin

(13) Anti -D Immunoglobulin

(14) Basiliximab

(15) Beractant Intra-tracheal Suspension

(16) Blood group sera

(17) Botulinum Toxin Type ‘A’

(18) Burn therapy dressing soaked in gel

(19) Bovine Thrombin for in vitro test for diagnosis in Haemorrhagic disorders

(20) Bovine Albumin

(21) Bretyleum Tossylate

(22) Calcium Disodium Edetate

(23) Carmustine

(24) Cesium Tubes

(25) Calcium folinate

(26) Cholestyramine

(27) Christmas Factor Concentrate (Coagulation factor IX prothrombin complex concentrate)

(28) Cobalt-60

(29) Corticotrophin

(30) Cyanamide

(31) Diagnostic Agent for Detection of Hepatitis B Antigen

(32) Diagnostic kits for detection of HIV antibodies

(33) Diphtheria Antitoxin sera

(34) Diazoxide

(35) Edrophonium

(36) Enzyme linked Immunoabsorbent Assay kits [ELISA KITS]

(37) Epirubicin

(38) Fibrinogen

(39) Floxuridine

(40) Follicle Stimulating Hormone [FSH]

(41) Flucytosin

(42) Filgrastim /Molgramostim (G- CSF/GM-CSF)

(43) Flecainide

(44) Fludarabine Phosphate

(45) Foetal Bovine Serum (FBS)

(46) Gadolinium DTPA Dimeglumine

(47) Gallium Citrate

(48) Gasgangrene Anti-Toxin Serum

(49) Goserlin Acetate

(50) Hepatitis B Immunoglobulin

(51) Hexamethylmelamine

(52) Hydralazine

(53) Idarubicine

(54) Idoxuridine

(55) Imatinib Mesilate

(56) Irinotecan

(57) Immunoassay kit for blood Fibrinogen degradation product for direct estimation for diagnostic test in D.I.C.

(58) Inactivated rabies vaccine [Human diploid cell]

(59) Inactivated rabies vaccine [Vero-cell]

(60) Intravenous amino acids

(61) Intravenous Fat Emulsion

(62) Iopamidol

(63) Iohexol

(64) (a) Indium (III) in bleomycin (b) Indium 113 Sterile generator and elution accessories (c) Indium 113 in brain scanning kit (d) Indium 113 in liver scanning kit

(65) Iscador, CLIA diagnostic kits

(66) Levodopa with benserazine

(67) Lenograstim

(68) Meningococcoal A and C combined vaccine with diluant solvent

(69) Methicillin

(70) Metrizamide Inj with diluant

(71) Monocomponent insulins

(72) Mycophenolate Mofetil

(73) Nalorphine

(74) Normal Human plasma

(75) Normal Human immunoglobulin

(76) Nuclear magnetic resonance contrast agent

(77) Normal Human serum Albumin

(78) Penicillamine

(79) Pentamidine

(80) Penicillinase

(81) Poliomyelitis vaccine (inactivated and live)

(82) Potassium Aminobenzoate

(83) Porcine Insulin Zinc Suspension

(84) Prednimustine

(85) Porcine and Bovine insulin

(86) Procarbazine

(87) Purified Chick Embryo Cell Rabies Vaccine

(88) Pyridostigmine

(89) Pneumocystis carinii IF kits

(90) Prostaglandin E 1 (PGE1)

(91) Radio-immunoassay kit for hormones (T3, T4, TSH Insulin, Glucogen, Growth Hormone, Cortisol, L.H., FSH and Digoxin)

(92) Radioisotope TI 201

(93) (a) Rabbit brains thromboplastin for PT test

(b) Reagent for PT tests

(c) Human Thrombin for TT tests

(94) Rabies immunoglobulin of equine origin

(95) Ritonavir

(96) Rivastigmine

(97) Rituximab

(98) Sevoflurane

(99) Saquinavir

(100) Recuronium Bromide

(101) Septopal beads and chains

(102) Sodium Arsenate

(103) Freeze Dried Form of Human Follicle Stimulating and Luteinising Hormones

(104) Solution of Nucleotides and Nucliosides

(105) Specific Desensitizing Vaccine

(106) Sterile Absorbable Haemostat for control of surgical vessel bleeding

(107) Strontium SR-89 Chloride

(108) Suxamethonium Chloride

(109) Selenium-75

(110) Teicoplanin

(111) Technitium-99M

(112) Tetrofosmin

(113) Ticarcillin

(114) Tranexamic Acid

(115) Tocainide

(116) Tri-iodothyronine

(117) Triethylene Tetramine

(118) Trastuzumab

(119) Thrombokinase

(120) Teniposide

(121) Trans-1- diamino

cyclohexane Oxalatoplatinum

(122) Ticarcillin Disodium and Potassium Clavulanate

combination

(123) Vindesin Sulphate

(124) X-ray diagnostic agents, the following :-

  1. Propylidone

  2. Ethyl iodophenylun decylate

  3. Iodipammide methyl glucamine

  4. Lipidoll utra fluid

  5. Patent blue

(125) Zalcitabine

(126) Zoledronic Acid

 

List 5 (See S. No. 84 of the Table)

(1) Chlorine

(2) Helium

(3) Silicon tetra chloride

(4) Germanium tetra chloride

(5) Phosphorous oxychloride

(6) Sulphur hexa flouride oxygen

(7) Oligo-poly iso cyanate ethyl-acetate solution

(8) Colouring ink for fibre

(9) Binder of polyurethane or vinyl chloride-vinyl acetate copolymer

(10) UV resin-1/ UV resin-2

(11) Nylon-12 granules / chips for sheath / loose tube

(12) Coloured nylon-12

(13) Elongated polyethylene tape

(14) Polyester tape

(15) Nylon thread

(16) Polyethylene cord

(17) Biaxilly oriented nylon tape

(18) Silica tube / rod, other than preform

(19)Aramid Yarn

(20) Impregnated Glass fibre reinforcement(Glass rovings)

(21) Rip Cord

(22) Nylon 11

 

List 6 (See S. No. 84 of the Table)

(1) E-glass yarn / roving for FRP

(2) UV resin for FRP

(3) Complex high molecular weight resin in acrylate solution for FRP

(4) Acrylated monomers

(5) Photoinitiater

(6) Tert butyl perbenzoate

(7) Zinc soap of long fatty acid mixture

(8) Modified polypropylene

(9) Ethylene acrylic acid (EAA)

List 7 (See S. No. 85 of the Table)

(1) (a) Laser rods - Neodymium: YAG, Neodymium : Glass, Ruby, Erbium : YAG, TI : A1203, Alexandrite, HO : YAG

(b) Helium- Neon Laser Tubes

(c) Semi-conductor visible lasers

(d) Dielectric coated mirrors for visible , near IR & 10.6 micrometer region

(e) Hard dielectric coated optics including thin film polarisers, calcite polarisers and Beam splitters

(f) ZnSe mirrors, ZnSe lenses and ZnSe windows

(g) Gratings and prisms

(h) Dye cells and laser dyes

(i) Thin film polarisers for visible, near IR region

(j) Electro- optic switches for visible, near IR and 10.6 micrometer region

(k) Flash lamps (Xenon, Krypton)

(l) Arc lamps (Krypton)

(m) Second harmonic generation crystals

(2) Energy storage capacitors

(3)Thyratrons

(4) Photodetectors and photomultipliers

(5) Metering needle valves and pressure indicators

(6) Spectroscopic grade pure gases viz., Xenon, Krypton, Fluorine, Argon

(7) Vaccum pumps of capacity upto 20 litres per minute

(8) Quartz and Special glasses

(9) Non linear crystals

(10) Electro- optic and Acousto-optic switches

(11) Special materials, namely, High purity gases, Kovar, Alumina and Zirconia fibres, Recrystallised Alumina Tubes, Optical polishing materials, Optical cleaning material, Dyes and Pitch for optical polishing

(12) Optical filters

List 8 (See S. No. 94 of the Table)

(A) Dental equipment, namely:-

(1) Air motor / turbine hand piece and control box with foot control , micromotors for dental applications

(2) Air rotor / turbine complete with or without air compressor

(3) Dental engines, for laboratory work or for chair side clinical work on patients

(4) Dental operating lights and fibre optic lights

(5) Ultrasonic dental cleaning system

(6) Ultrasonic scalers of all types

(7) Spot welders for dental use with auxiliary functions, outlet :- annealing jack, heat-treat tables, auxiliary cables or plug-in vise

(8) Air turbine head / cartridges :- borden turbines - regular cartridge, borden turbines-silencer cartridge and quiet air turbines - compact miniature standard

(9) Dental burrs of all varieties of various shapes and sizes - carbide, diamond or steel, Carbon Burrs with Titanium coating, Tungsten Burrs

(10) Dental hand pieces, for - air motor, air turbine or drilling engines (clinical and laboratory) for filling, packing and condensation purposes and micromotors

(11) Endodontic instruments (root canal instruments), brosches, reamers and files, fillers / wideners and pluggers

(12) Anaesthetic cartridges for dental use

(13) Body contoured self-adjusting electrically operated dental chair

(14) Equipment for chrome cobalt work

(15) Fibre optic light equipment with attachments for dental work

(16) Porcelain furnace

(17) Sand blasting equipment for dental use

(18) Vaccum investing equipment for dental castings

(19) Developing tarks for dental X-ray (automatic and ordinary)

(B) Ophthalmic equipment, namely:-

(1) Projection magnifier for contact lens inspection and verification

(2) Radiuscope base curve (for measurement of contact lenses)

(3) Contact lens thickness measuring gauge

(4) Stereozoom microscope for inspection of contact lenses

 

(5) Softometer for measurement of the base curve of soft contact lenses

(6) Contact lens lathes

(7) Contact lens polishing machines

(8) Ophthalmic operating lights and fibre optic lights

(9) Exophthalmometer

(10) Ophthalmo dynamometer

(11) Corneal anesthesiometer

(12) Dark adaptometer

(13) Glare testing equipment

(14) Pantoscope

(15) Cryo-lathe

(16) Ophthalmic cryo equipment

(17) CAM stimulator

(18) Roper hall foreign body locator

(C) Other medical equipment, namely:-

(1) High powered X-ray unit more than 50 KW with special attachments for paediatric patients, image intensifiers, TV system and cut film camera

(2) Automatic electronic blood cell counter

(3) Multi channel recorder for cardiac electrophysiology with computerised analysis system including facilities for memory

(4) Equipment for computerised intra-operative mapping system

(5) Operating table- electro hydraulic type

(6) Operating lamps - shadowless

(7) Immuno - flourescence microscope with or without attached photo micrography set

(8) Cryostat

(9) Thermodyne

(10) Ultramicrotome

(11) Cardio-tachograph

(12) Intensive care servo-controlled incubator

(13) Open infant care system with servo control

(14) Oxygen analyser

(15) Apnea monitor

(16) Non-invasive continuous BP monitor

(17) Transcutaneous oxygen monitor

(18) ‘Filter cartridge’ of ‘filter self rescuer’

(19) Portable intermittent traction machines

(20) Burn therapy dressing soaked in protective gel

(21) Cystoscope and colposcope

(22) Urological X-ray examination table

(23) Bipolar angiography equipment

(24) Electron microscope

(25) Rotary microtome

(26) Billirubinmeter

(27) Fluorescent microscope

(28) Phase contrast microscope

(29) Inverted microscope

(30) Caogulometer

(31) Daree gromel illuminator microscope

(32) Densitometer

(33) Tissue processor

(34) Paediatric / neonatal laryngoscope

(35) Resuscitator other than compressed air breathing type

(36) O2 blenders

(37) Reinforced corrugated tubing

(38) Automatic plasmapheresis equipment (blood cell separation)

(39) Gas failure alarms

(40) Ultrasonic nebulisers

(41) Heat nebulisers

(42) Local analgesic spray

(43) Non-re breathing valves

(44) High pressure, pulsing, electronic controlled autoclaves

(45) Anaesthesia apparatus

(46) Hypothermia machine

(47) Respirometer

(48) Pulmonary function test machines

(49) Capnograph-CO2 meter blood gas - CO2 meter gas to gas

(50) Oxygen blending mask

(51) Paediatric anaesthesia set

(52) Cautery proof cardioscopes with memory

(53) Dosemeter

(54) Polystyrene phantoms

(55) Water phantom

(56) Mould room equipment (including styrofoam gatter)

(57) Radiation field analyser

(58) Survey equipment (including neutron monitor )

(59) Densitometer for film densitometry

(60) TLD (for internal dosimetry)

(61) Isotope calibrator

(62) Whole body human phantom

(63) Angioscope for coronary angiography

(64) Doppler equipment

(65) Xeroradiographic equipment

(66) Urological X-ray examination unit

(67) Pressure injector with rapid serial changing unit

(68) Computerised tread mill

(69) Vector cardiograph

(70) Polygraph

(71) Phonocardiograph and systolic time interval equipment

(72) Tonometer

(73) Photo-coagulator

(74) Lithotome

(75) Extracorporal lithotriper

(76) Calibrated thermo compensated / thermostabilised anaesthetic vapouriser

(77) Foetal monitor

(78) Bipolar coagulator and forceps

(79) Electro-encephalography equipment

(80) Doppler carotid scanner

(81) Electromyography equipment and accessories thereof

(82) Cryosurgery equipment

(83) Trans-cutaneous nerve stimulator

(84) Filters for extra corporal circulation

(85) PET scanner

(86) Operating microscope for microsurgery

(87) Operating instruments for microsurgery

(88) Cardio-vascular catheterisation lab equipment

(89) Automatic / laser multi image and multi format cameras

(90) Bedside arrythmia analyser / monitor

(91) High pressure contrast medium injector

(92) Thermal printers, black/white for medical use

(93) Thermal printers, colour for medical use

(94) Optical disc recorders for medical image storage

(95) Multichannel patient monitoring system upto three channels provided - (a) system has plug-in module option for any three parameters out of ECG, respiration, BP, pulse and temperature or (b) system has monitoring options for any three parameters out of ECG, respiration, BP, pulse, temperature as well as one or more out of arrythmia, cardiac output, oxygen and carbondioxide saturation levels

(96) Brain mapping system

(97) Evoked potential system

(98) Holter monitor system

(99) X-ray tubes and tube inserts for X-ray equipment, CT and Cardiac more than 20/40 KW

(100) Micro processor controlled high frequency X-ray generator more than 50 KW

(101) Contrast medium injector with or without ECG trigger

(102) Catheterisation cine film analyser

(103) radiation protection equipment

(104) Catherterisation table light (dentalite)

(105) Air / power driven drills, saws and reamers

(106) Automatic percutaneous lumbar disectomy, console and kits

(107) Urodynamic study

(108) Gamma counter

(109) Cell counter

(110) DC Defibrillator for external use

(111) Suction catheter, Epidural catheter, thermodilution catheter

(112) Manual skin grafting knife and its disposable blades

(113) Electric dermatome (skin grafting knife) electrically operated (mains battery powered) and its disposable knife blades

(114) Air driven dermatome (skin grafting knives) operated on compressed air and its disposable knife blades

(115) Mesh graft dermatome for expanding skin grafts, disposable mesh graft carriers for the above

(116) The following items required by spinal patients and other categories of physically handicapped people :-

(a)chairs - folding wheel chairs with detachable arms and footrests, special light wheel chairs for easy handling, motorised wheel chairs, special purpose chairs for stairs climbing for tetraplegics and paraplegic workers (b) aids for disabled, namely, folding walking frames

(c)aids to extend reach to pick up small items (with small magnet pick up)

  1. specialised fixtures for orthopaedic and spastic, tetraplegics for manoeuvering and providing dexterity to fingers and wrist

  2. turning beds for prevention of pressure sores

  3. emulsion cushions for tetraplegics and working paraplegics to avoid pressure sores

(117) Multichannel (more than 3 channels) cardiac monitoring system with / without central monitoring unit

(118) Hyperthermia machine

(119) Polypropylene mesh for hernia repair

(120) Dental X-ray machine

(121) Digital imaging system for face X-rays

(122) Orthopantom ram (O.P.G.)

X-rays for jaws

(123) Jaw surgery equipment - (a) stryker saws (b) special titanium and tungsten carbide drill bits (c) jaw surgery instruments including special retractors, bone holders

(124) ECG transtelephonic recorder / transmitter / recorder-cum-transmitter

(125) Linear accelarator

(126) Precision delivery device used for administration of insulin with penfill cartridges such as Insulin Pen

(D) Other goods, namely:-

(1) Dental implant

(2) Dental cements

(3) Impression materials of all types/ alginate / rubber base / silicon base

(4) Dental fillings and non precious metal for crown / bridge / and cast partial denture-

  1. chrome cobalt / nickel chrome / porcelain bond metal / low fusing technique alloy

  2. dental crowns and artficial teeth

(5) Gutta- percha points- dental silver amalgam

(6) Dental investment of all types / phosphate bond / gypsum bond / plaster and stone

(7) Dental X-ray film - intra-oral / extra- oral / panoramic / occlusal

(8) Dental porcelain of all types

(9) Acrylics for dental use - denture base material heat cure and cold cure

(10) Waxes of all types for dental use

List 9(A) (See S.No. 174 of the Table)

PARTS, CONSUMABLES AND OTHER ITEMS

(1) Leather, plastic, rubber coco board, masonite board or plastic board, heels with or without rubber/PVC top lift

(2) Toe caps and counters for leather footwear

(3) Insoles or midsoles and sheets therefor

(4) Welts made from leather or plastic

(5) Shoes eyelets

(6) Felt sleeves

(7) Heel tips

(8) Unit soles with or without heels

(9) Stamping wheels

(10) Patterns for leather footwear

(11) Plastic or nylon tipped hammers

(12) Plastic, PVC or nylon lasts with or without steel hinges

(13) Clicking boards for leather machinery

(14) Harness needles for hand sewing pre-punched cards

(15) Pre-punched cards

(16) Leather designers kit, namely, designers knife, shoe measuring tape, designers tape and satra vaccum former

(17) Industrial sewing machine needles with leather point

(18) Bell skiving knives

(19) Band knife for splitting machines

(20) Cutting and clicking dies

(21) Aluminium shoe forms with or without heating elements

(22) Silver marking pencils or pens and refills thereof

(23) Polyurethane films and polyurethane foils of thickness 0.3 mm. and above but not above 0.7 mm., for finishing leather

(24) Non-woven material coated with thermoplastic for the manufacture of toe-counters

(25) Cellulose board insole sheets

(26) Leather board made from leather scrap for the manufacture of counters and stiffeners

(27) Masonite or coco board

(28) Sole leather bends

(29) Styrene butadiene styrene oilbound copolymer for the manufacture of soles

(30) Rubber, resin rubber, EVA or crepe sheets for soles and heels

(31) Felt, all types

(32) Sulphonated / sulphated / oxidised / chlorinated cod oil or sulphonated / sulphated / oxidised / chlorinated neats foot oil or sulphonated / oxidised / chlorinated fish oil or mixtures thereof

(33) Pigment finishes for leather

(34) Aluminium tanning agents, oil tanning agents, zirconium tanning agents, basic chrome sulphate

(35) Polishes, creams and similar preparations for footwear or leather

(36) Casein, resin (other than acrylic resin) and polyurethane binders

(37) Slip agents of heading 32.08

(38) Lacquer and lacquer emulsion of heading 32.08

(39) Preservatives of heading 29.42

(40) Synthetic fat liquors (with or without hydrocarbons), non-ionic fat liquors, and mixtures thereof

(41) Fatty oil or pull up oil

(42) Syntans

(43) Solvent soluble dye Mordant Brown of Hue No.79

(44) Solvent soluble dye Acid Brown of Hue Nos. 75, 76, 97, 98, 126, 127, 144, 159, 160, 161, 162, 165, 188, 191, 194, 196, 214, 237, 256, 265, 268, 270, 282, 290, 298, 303, 310, 321, 322, 349, 355, 358, 359, 360, 362, 365, 373, 387, 396, 402, 422, 425, 432, 433, 434 or 447

(45) Solvent soluble dye Acid Black of Hue Nos. 50, 52, 71, 76, 82, 83, 84, 85, 115, 132, 169, 172, 194, 209, 210, 213, 215, 221 or 234

(46) Solvent soluble dye Acid Blue of Hue Nos. 115, 133, 134, 193, 254, 260, 312 or 349

(47) Solvent soluble dye Direct Blue of Hue No. 59 or 78

(48) Solvent soluble dye Acid Red of Hue No. 97, 119, 120, 167, 231, 234, 248, 283, 324, 362, 399, 404, 407 or 423

(49) Solvent soluble dye Direct Red of Hue No. 23, 99, 111 or 239

(50)Solvent soluble dye Acid Green of Hue No. 20, 26, 68 or 111

(51) Solvent soluble dye Acid Orange of Hue Nos. 51, 66, 78, 80, 95, 162, 168 or 170

(52) Solvent soluble dye Acid Violet of Hue No. 54, 80 or 90

(53) Solvent soluble dye Acid yellow of Hue No. 96, 99, 194, 204, 220 or 243

(54) Solvent soluble dye Direct Orange of Hue No. 61

(55) Solvent soluble dye Direct Brown of Hue No. 94 or 209

(56) Solvent soluble dye Direct Violet of Hue No. 46

(57) Solvent soluble dye Direct Black of Hue No. 120 or 155

(58) Solvent soluble dye Direct Green of Hue No. 66.

List 9(B) (See S. No. 174 of the Table)

OTHER PARTS, CONSUMABLES AND ITEMS

(1) Formulations containing either Thio Cyano Methyl Thio Benzothiazole (TCMTP) or Para Chloro Meta Cresol (PCMC) or both; Self basifying chrome tanning agents

(2) Penetrators

(3) Stamping foil in strips of width not exceeding 6 inches

(4) Eyelets, hooks, rings, all type locks including magnetic locks, push clips, metal handle, key chain holder, corners, puller, fancy caps, clamps, decorative rivets, decorative fittings and logos, handle holders, studs, sockets, hinges, buckles, metal frames, tacks and washers

(5) Buttons, press-fasteners and snap-fasteners falling under heading 96.06

(6) Magnetic buttons

(7) Abrasive sheets falling under sub-heading 6805.20

(8) Shanks and welts falling under headings 73.26 and 64.06 respectively

 

 

 

 

 

 

(9)The following chemicals for the manufacture of leather chemicals :

  1. Phenol

  2. Naphthalene

  3. Paraffin wax

  4. Dicarboxylic acid and mixtures thereof

  5. Acrylic acid / Methacrylic acid

  6. Synthetic substitute for Sperm oil

  7. Synthetic substitute for Neats foot oil

(VIII) Alcohol mixture of C9 , C10 , C11

(IX)Thio cyano methyl thio benzothiazole (TCMTB)

(X) Para chloro meta cresol (PCMC)

(XI) Lactic Casein

(XII) Titanium Dioxide

(XIII) Iron Oxide

(XIV) Cellulose Acetate Butyrate

(XV) Methoxydihydropyrane

(XVI) Dioxy Diphenyl Sulphone

(XVII) Dehydro Thio Paratoludine

(XVIII) Nitro Amino Phenol Sulphonic Acid

(XIX) Dicyandiamide

(XX) Silicone Oil in solvent or water

(XXI) Sodium Picramate

(XXII) Methyl Pyrozollic Acid

(XXIII) Itaconic Acid

(XXIV) 1-Methoxy Propanol-2

(XXV) Ethyl Acetate

(XXVI) Butyl Acetate

(XXVII) 2 Ethyl Hexyl Acetate

(XXVIII) Emulsifiers

(XXIX) Ethyl Glycol

(XXX) Butyl Glycol

List 10 (See S. No.190 of the Table)

(1) Cold drawn free cutting brass rods of diameter 0.4 mm. to 14 mm.

(2) Leaded brass strips and sheets in coils or flats of thickness upto 4 mm. and width upto 40 mm.

(3) Leaded brass strips in coils or in straight length of thickness 0.01 mm. to 0.05 mm. and width upto 50 mm.

(4) Leaded naval brass strips in coils of thickness 0.12 mm. to 3 mm. and width 8 mm. to 30 mm.

(5) Nickel silver brass strips / flats of thickness 0.10 mm. to 1.50 mm. and width 6 mm. to 55 mm.

(6) Phosphor bronze strips of thickness 0.02 mm. to 1.5 mm. and width from 10 mm. to 30 mm.

(7) Phosphor bronze rods of diameter 0.5 mm. to 2 mm. and length upto 3000 mm.

(8) Brass pipes of outer diameter 0.45 mm. to 1.9 mm.

(9) German silver rods of diameter 5 mm. to 10 mm.

(10) Horological steel rods (leaded) bright drawn or centreless ground finish in perfectly straightened lengths of diameter 0.3 mm. to 6 mm. and length upto 3 metres

(11) Horological steel strips cold rolled with accurate flatness and bright regular edges of thickness 0.01 mm. to 1 mm. and width 0.2 mm. to 30 mm.

(12) Super alloy strips, of thickness upto 0.70 mm. and width upto 40 mm.

(13) Synthetic ruby for watch jewels

(14) Spring steel strips type DIN 2075 Kl2 of thickness 0.01 mm. to 0.5 mm. and width 0.2 mm. to 0.5 mm.

(15) Stainless steel strips of thickness 0.01 mm to 1.5 mm and width upto 45 mm

(16) Stainless steel wire in coils for click spring and setting lever spring of diameter 0.1 mm. to 1.5 mm.

(17) Brass flats of thickness upto 6.5 mm., width upto 50 mm. and length upto 2000 mm.

(18) Brass rods of diameter upto 36.5 mm.

(19) Nickel silver rods of diameter upto 3 mm. and length upto 3000 mm.

(20) Leaded brass pipes of outer diameter 18 mm. to 35 mm., and inner diameter 10 mm. to 30 mm.

(21) Stainless steel flats, cold rolled or hot rolled for manufacture of watch case bezels and other watch parts, of thickness 2.5 mm. to 10 mm. and width upto 55 mm.

(22) Cold rolled stainless steel strips for the manufacture of watch back covers and other watch parts, of thickness upto 5.0 mm. and width upto 55 mm.

(23) Unleaded brass strips of thickness 0.07 mm. to 1.5 mm. and width 5 mm. to 50 mm.

(24) Phosphor Bronze strips in coils of thickness 0.125 mm. and width 28 mm.

(25) Lacquers and varnishes

(26) Brass circles of thickness 0.4 mm. to 0.5 mm. and diameter 24 mm. to 50 mm.

(27) Brass for making appliques/indexes/logos/windows with 2 feet, of thickness 0.3 mm. to 2 mm. and width 1 mm. to 4 mm.

(28) Nickel silver circles of thickness 0.5 mm. and below and diameter 24 mm. to 50 mm.

(29) Tritium activated zinc sulphide

(30) Luminous compounds for dials

(31) Silver solder core wire for dial legs in straight length or in coil of diameter 0.4 mm. to 1 mm.

(32) German silver strips of thickness 0.1 mm. to 1 mm. and width 5 mm. to 10 mm.

(33) Free cutting quality stainless steel rods of diameter upto 6 mm. and length upto 3000 mm.

(34) Polyamide strips of thickness upto 0.10 mm. and width upto 15 mm.

(35) Copper berillium strips in coils of thickness upto 0.35 mm. and width upto 25 mm.

(36) Polished steel strips in coils of thickness 0.05 mm. to 0.5 mm. and width upto 15 mm.

(37) Leaded brass rods of diameter 0.5 mm. to 20 mm. and length upto 3000 mm.

(38) Nickel silver strips of thickness upto 0.1 mm. and width upto 50 mm.

(39) Titanium copper strips in coils/ cut lengths of thickness 0.18 mm. to 0.20 mm. and width 15 mm. to 20 mm.

(40) Aluminium alloy strips whether or not in coil of thickness upto 0.55 mm. and width upto 35 mm.

(41) Leaded beryllium copper rods of diameter 0.5 mm. to 20 mm. and length upto 3000 mm.

(42) Stainless steel pipes of outer diameter 1.8 mm., inner diameter 1.54 mm. and length upto 3000 mm.

(43) Mineral glass sheets

(44) Copper wire of diameter 1 mm. to 2.5 mm. for making logos/indexes/applique, for watch dials

(45) Crystal glass chatin (cast glass profiles, edge worked and enamelled with reflecting layer) for watch dials

(46) Unleaded brass sheet of thickness 0.10 mm. to 1.5 mm., width upto 250 mm. and length upto 1250 mm.

(47) Titanium strips of thickness 0.01 mm. to 2.0 mm. and width upto 55 mm.

 

(48) Titanium flats of thickness upto 7 mm. and width upto 55 mm.

(49) Titanium rods of diameter upto 20 mm. and length upto 3000 mm..

List 11( See S.No 207 of Table)

1

Seconds and defectives of goods falling under Chapter 72

2

Goods falling under heading 72.01 or 72.02

3

Hot rolled stainless steel coils

4

Hot rolled grain oriented or hot rolled non grain oriented steel coils

5

Tin mill black plate (TMBP) coils, for the manufacture of tin plates only

6

Hot briquetted iron (HBI) and sponge iron, imported by or on behalf of an electric arc furnace unit or induction furnace unit

7

Melting scrap of iron or steel (other than stainless steel or heat resisting steel), for use in, or supply to, a unit for the purpose of melting

8

Re-rollable scrap

9

Scrap of stainless steel, for the purpose of melting

10

Ingots

11

Billets, blooms and slabs containing by weight less than 0.6 per cent. of carbon

12

Iron or non-alloy steel hot rolled coils (flat rolled products in coils, not further worked than hot rolled, of not less than 1.5 mm. thickness, of a width exceeding 500 mm. and of a weight not less than 500 kgs. per piece), containing carbon content less than 0.6 per cent. by weight

13

Stainless steel slabs

14

All goods of Chapter 72 required for the manufacture of goods falling under Chapter 84 or 85 (other than those falling under headings 84.15, 84.50, 84.69, 84.70, 84.71, 84.72, 84.73, 84.82, 84.85, 85.06,  85.07, 85.09, 85.10, 85.11, 85.12, 85.13, 85.16, 85.18, 85.19, 85.20, 85.21, 85.22, 85.23, 85.24, 85.26, 85.27, 85.28, 85.31, 85.32, 85.35, 85.36, 85.37, 85.38, 85.39, 85.40, 85.41, 85.42, 85.44 and 85.48 and sub-headings 8407.31, 8407.32, 8407.33, 8407.34, 8408.20, 8409.91, 8409.99, 8414.30, 8414.80, 8414.90, 8418.21, 8418.22, 8418.29, 8418.91, 8418.99, 8422.11, 8422.19, 8423.10, 8448.19, 8451.10, 8451.90, 8452.10, 8452.30, 8452.40, 8452.90, 8479.50, 8479.60, 8479.89, 8483.20, 8525.30 and 8525.40)”.

List 12 (See S. No. 214, 216 and 217 of the Table)

(1). Land Seismic Survey Equipment and accessories, requisite vehicles including those for carrying the equipment, seismic survey vessels, global positioning system and accessories, and other materials required for seismic work or other types of Geophysical and Geochemical surveys for onshore and offshore activities

 

(2) All types of Drilling rigs, jackup rigs, submersible rigs, semi submersible rigs, drill ships, drilling barges, shot-hole drilling rigs, mobile rigs, workover rigs consisting of various equipment and other drilling equipment required for drilling operations, snubbing units, hydraulic workover units, self elevating workover platforms, Remote Operated Vessel(ROV)

 

(3)Helicopters including assemblies/parts

 

(4) All types of Marine vessels to support petroleum operations including work boats, barges, crew boats, tugs, anchor handling vessels, lay barges and supply boats, Marine ship equipment including water Maker, DP system and Diving system

 

(5) All types of Equipment/units for specialised services like diving, cementing, logging, casing repair, production testing, simulation and mud services, oil field related lab equipment, reservoir engineering, geological equipment, directional drilling,Stimulation, Coil Tubing units, drill stem testing (DST), data acquisition and processing, solids control, fishing(as related to downhole retrieval in oil field operations), well control, blowout prevention(BOP),pipe inspection including Non

Destructive Testing, coring, gravel pack, well completion and workover for oil/gas wells including wireline and downhole equipment

 

(6) All types of casing pipes, drill pipes, production tubing, pup joints, connections, coupling, kelly, cross overs and swages, Drive Pipes

 

(7) All types of drilling bits, including nozzles, breakers and related tools

 

(8) All types of oil field chemicals including synthetic products used in petroleum operations, oil well cement and cement additives, required for drilling, production and transportation of oil or gas

 

(9) Process, production and well platforms for oil, gas and water injection including items forming part of the platforms and equipment required like process equipment, turbines, pumps, generators, compressors, primemovers, water makers, filters and filtering equipment, Telemetery, Telecommunication, Tele-Control and other material required for platforms

 

(10) Line pipes for flow lines and trunk pipelines including weight-coating and wrapping

 

(11) Derrick barges, Mobile and stationary cranes, trenchers, pipelay barges, cargo barges and the like required in the construction/installation of platforms and laying of pipelines

 

(12) Single buoy mooring systems, mooring ropes, fittings like chains, shackles, couplings marine hoses and oil tankers to be used for oil storage and

connected equipment, Tanks used for storage of oil, condensate, water, mud, chemicals and related materials

 

(13) All types of fully equipped vessels and other units/equipment required for pollution control, fire prevention, fire fighting, safety items like Survival Craft, Life Raft, fire and gas detection equipment, including H2S monitoring equipment.

 

(14) Mobile and skid mounted pipe laying, pipe testing and pipe inspection equipment

 

(15) All types of valves including high pressure valves

 

(16) Communication equipment required for Petroleum operations including synthesized VHF Aero and VHF Marine multi channel sets

 

(17) Non-directional radio beacons, intrinsically safe walkie-talkies, directional finders, EPIRV, electronic individual security devices including electronic access control system

 

(18) Specialized antenna system, simplex telex over radio terminals, channel micro wave systems, test and measurement equipment

 

(19) X-band radar transponders, area surveillance system

 

(20) Common depth point (CDP) cable, logging cable, connectors, geo-phone strings, perforation equipment and explosives

 

 

 

 

(21) Wellhead and christmas trees, including valves, chokes, heads spools, hangers and actuators, flexible connections like chicksons and high pressure hoses, shut down panels

(22) Cathodic Protection Systems including anodes

 

(23) Technical drawings, maps, literature, Data tapes, Operational and Maintenance Manuals required for petroleum operations

(24) Sub-assemblies, tools, accessories, stores, spares, materials, supplies, consumables for running, repairing or maintenance of the goods specified in this List

List 13 (See S. No. 218 of the Table)

(1) Land Seismic Survey Equipment and accessories, seismic survey vesels, global positioninig system and accessories, and other materials required for seismic work or other types of Geophysical and Geochemical surveys for on-shore activities
(2) All types of Drilling rigs, shot-hole drilling rigs. Mobile rigs, workover rigs consisting of various equipment and other drilling equipment required for drilling operations, snubbing units, hydraulic workover units, self-elevating workover platforms
(3) All types of Equipments / units for specialized services like, cementing, logging, casing repair, Production testing, simulation and mud services, reservoir engineering, geological equipment, directional drilling, Stimulation, Coil Tubing units, drill stem testing (DST), data acquisition and processing, solids control, fishing (as related to downhole retrieval in coal bed methane operations), well control, blowout prevention (BOP), pipe inspection including Non Destructive Testing, coring, gravel pack, well completion and workover for CBM wells including wireline and downhole equipment
(4) All types of casing pipes, drill pipes, production tubing, pup joints, connections, coupling, Kelly, cross overs and swages, Drive Pipes
(5) All types of drilling bits, including nozzles, breakers and related tools
(6) All types of coal bed methane chemicals including synthetic products used in coal bed methane operations, required for drilling, production and transportations of gas
(7) Process, production and well installation for CBM and water injection including items forming part of the installation and equipment required like process equipment, turbines, pumps, generators, compressors, primemovers, water makers, filters and filtering equipment, Telemetery, Telecommunication, Tele-Control and other material required for installations
(8) Line pipes for flow lines and trunk pipelines including weight-coating and wrapping
(9) Tanks used for storage of coal bed methane, water, mud, chemicals and related materials
(10) All types of fully equipped units/equipment required for pollution control, fire prevention, fire fighting, safety items like fire and gas detection equipment, including H2 S monitoring equipment
(11) Mobile and skid mounted pipe laying, pipe testing and pipe inspection equipment
(12) All types of valves including high pressure valves
(13) Communication equipment required for operations including synthesized VHF Aero and VHF multi channel sets, Non-directional radio beacons, intrinsically safe walkie-talkies, directional finders, EPIRV, electronic individual security devices including electronic access control system
(14) Specialized antenna system, simplex telex over radio terminals, channel micro wave systems, test and measurement equipment
(15) Area surveillance system
(16) Common depth point (CDP) cable, logging cable, connectors, geo-phone strings, perforation equipment and explosives
(17) Wellhead and Christmas trees, including valves, chokes, heads spools, hangers and actuators, flexible connections like chicksons and high pressure hoses, shut down panels , Cathodic Protection Systems including anodes
(18) Technical drawings, maps literature, Data tapes, Operational and Maintenance Manuals required for coal bed methane operations
(19) Sub-assemblies, tools, accessories, stores, spares, materials, supplies, consumables for running, repairing or maintenance of the goods specified in this List

List 14 (See S. No 219 of the Table)

(i) Brick press with accessories like moulds, pallets, stackers, clamping devices or the like for fly ash sand-lime brick capacity 3000-5000 bricks/hr. up and down stroke pressure 300-400 kgs. / sq.m.

(ii) Flyash block making machine of capacity 1000 - 2000 block/hr. with vibrators, mixer and accessories like moulds, pallets, stackers, clamping devices or the like

(iii) Mixer with bottom valve and outlet pipes for cellular concrete

(iv) Moulding equipment, cross cutting plant and longitudinal cutting plant, for cellular concrete

(v) Centering bridge for moulds

(vi) Moving grate sintering strand for light weight flyash cellular concrete

(vii) Purification plant including diaphragm, pump, vaccum filter, gas scrubber, for phosphogypsum

(viii) Flash calciner

(ix) centrifuge for calcination equipment

 

(x) Partition panel plant

(xi) Moulds for phosphogypsum

(xii) Drier-cum-calciner

(xiii) Edge Runner Mill (for crushing and kneading of Clay and Flyash Mixture output 15 to 40 tons per hour depending on the perforation of the grinding plates)

(xiv) Pan Mixer (output 25 tons per hour)

(xv) Double Shaft Mixer (for mixing of the material consisting of Clay and Flyash)

(xvi) Vaccum Worm Press Extrusion machine (capacity of the press up to 36 tons of material per hour)

(xvii) Mouth piece (for the above vaccum Worm Press with dimensions corresponding to the required type of Bricks or Blocks which will be produced)

(xviii) Automatic Equipment (for cutting and handling of Bricks between the pressing shop and dryers)

(xix) Plant and Machinery required for making hollow-core roofing/flooring units

(xx) Large-size plants for manufacturing of hollow and solid concrete blocks for walling

(xxi) Mechanised hydraulically operated Tunnel Form of Wall forms, Slabforms, Column forms

(xxii) Large-size vibrating-beds with integrated curing and wire-tensioning arrangements

(xxiii) Vibrating-distributors for speedy production of prefab building parts

(xxiv) Hydraulic presses for manufacturing pavement blocks

(xxv) Hydraulic heavy duty press for making Hollow and Solid Concrete Blocks

(xxvi) Foam Generating Equipment, spiral pumps and Foaming compound for light weight cellular concrete

(xxvii) Densified Wood Fibre Plates ( Moulded door skins/ door facings) for door shutters

List 15 (See S. No. 222 of the Table)

  1. Sarin Dia Planner
  2. Colorimeter
  3. Proportion Scope
  4. Diamond Tester
  5. Moissanite Tester
  6. Stimulant Set
  7. OGI Mega scope
  8. Gemmoscope
  9. Microscope of all types
  10. U.V Lamp
  11. Stoppani Gauge
  12. Gem meter
  13. Day light lamp
  14. Loupes and Sieves
  15. Hardness pencil set
  16. Refractometer
  17. Polariscope
  18. Dichroscope
  19. Color master
  20. Geiger mular counter
  21. Spectroscope of all types
  22. Furnace with microprocessor
  23. Steam cleaner
  24. Magnetic polisher
  25. Plating machine
  26. Vacuum pump
  27. Foredom motors
  28. Files, Brushes, all types
  29. Laser soldering machine
  30. X ray compact machine
  31. Electroforming machine
  32. Micromatic wax welder
  33. Stamping machine
  34. Refining system
  35. JCDS software
  • Jewel Cad software
  • Investment powder
  • Mould rubber
  • Injection Wax
  • Electro plating solutions
  • Tools and equipment relating to handmade process
  • Multiple pass drawing machine
  • Drawing benches
  • Tube forming machines
  • Machine for chain soldering side by side
  • Spirals making machines
  • Presses (Eccentric, Hydraulic drawing press)
  • Rolling machine (combined/Profile Groovers/ strip making)
  • Casting machines/ vacuum/ centrifugal
  • Valcangers
  • Investment Mixing machine
  • Wax injector
  • Programmable Burnout Furnace
  • Devaxing oven machine
  • Sand blasters
  • Frames
  • Pneumatic sprue cutter
  • Flexible shafts with motor
  • Hand held micro motors light duty
  • Hand pieces for flexible shaft
  • Engravers
  • Hand helm Micro Motor with variable speed
  • Tumbling machines
  • Rotary, Tumbler with Media
  • Centrifugal Barrel Polishing machine with media
  • Buffing machine
  • Dust collectors
  • Electro polishing unit
  • Electroplating unit
  • Ultrasonic cleaning machine
  • Vibrator with steel media
  • Split lap machine
  • Analytical balances
  • Cupellation furnace
  • XRF machine
  • Gold/Paste, gold solders
  • Braking machine
  • Gas Torch
  • Breezing torch unit
  • Brazing plates
  • Drills, Burs, Needles
  • Compounds, Chemicals, Buffs and Compounds, Salts, Solutions, Baths
  • Silver pastes, silver solders Findings
  • Testing equipments
  • Electo Discharge machine
  • Engraving machine
  • Drilling machine
  • Milling machine
  • Surface Grinding machine
  • Electronic Weighing balance carats/grams
  • Other apparatus and tools
  • Ventilation system with air purifier
  • Safety glasses
  • Masks
  • Precious Metal Salts
  • Melting pots
  • Stamping Press of all types
  • Stamping Dies
  • Engraving block and gravers
  • Various tools, punches, hammers, anvil, files
  • Conveyor Belf Furnace
  • Machine tools for working in hand pneumatic hydraulic or self-contained non electric motor
  • Hand saw beads
  • Inter-changeable tools, hand tools or power operated tools for pressing, stamping, punching and taping
  • Hand tools, blow lamp anvils, portable forges, hand and pedal operated grinding wheels with frame works

List 16 (See S. No. 227 of the Table)

(1) Heat Exchangers for steam sterilisation of soil in green house

(2) Low draught horizontal axial fans with energy efficient motors

(3) Fogging machines

(4) Automatic shading system

(5) Drip irrigation system for green house

(6) Humidifiers

(7) Kool-cel pad system for cooling

(8) Ultra violet retardant fibre glass / plastic sheets

(9) Flower grading machine

List 17 (See S.No. 228 of the Table)

1. All types of Refinery Process Units including distillation (CDU, VDU, Condensate Fractionator), thermal cracking (Delayed Coker, Visbreaker, Flexicoker), catalytic cracking (FCC, Hydrocracker), lube processing (Deasphalting, Dewaxing, Solvent Extraction), hydro-desulphurisation/hydrotreating (Naphtha, Diesel, VGO, ARDS, LC Fining, H. Oil), alkylation, isomerisation, catalytic reforming, treating (Merox, Amine), recovery (Propylene, Ethylene, Butane), synthesis (MTBE, TAME), gas concentration plant, bitumen blowing, sour water stripping and extraction (Pentane, Hexane, BTX).

2. All types of Hydrogen Generation, Recovery and Purification Plants, Sulphur Recovery Plants including Tail Gas Treatment Units, with associated components and equipments, including reactors (like shift, Claus, hydrotreater, CBA, desulphurizer), furnaces, steam reformers, waste heat boilers, condensers, Pressure Swing Adsorption (PSA) systems, incinerators, vessels, boilers, pumps, compressors, drivers, alongwith associated instrumentation and control systems and auxiliaries (skidded or otherwise).

3. All types of Utility Systems, including Nitrogen Systems comprising of generation, storage and vaporization plants, Flare Systems comprising of flare tips, stacks, seal drums, knockout drums and pumps, Refrigeration Systems comprising of compressors, refrigerant storage and heat exchangers, Emergency Power Systems comprising of generators, UPS and batteries, with component equipments and all systems auxiliaries, instrumentation and control systems.

4. All types of Process Subsystems, including Continuous Catalyst Regeneration Systems for Reformer, Recovery Plus Systems for Reformer, Power Recovery Train Systems for FCC, Feed Nozzles for FCC, Vapour Recovery Systems, Cryogenic Systems for LPG either supplied separately or as a whole, with component equipments, drivers, instrumentation and control systems, and auxiliaries.

5. All types of Water Handling and Treatment Systems, including sea water intake systems comprising of sea water band screens, Desilting systems for still basin, Sea Water filtration/Chlorination Systems, Desalination plants, Cooling Water Towers, Demineralization plants, Condensate Polishing Systems, Deaerators and Potable Water Systems, and all component equipments, vessels, pumps, vapourisers, condensers, filters, eductors, heat exchangers, drivers, screens, framing structures, gates, instrumentation and control systems, activated carbons, ion exchange resins, resin traps, additive injection systems and auxiliaries (skidded or otherwise)

6. All types of Effluent Solids/Liquids/Gaseous Processing, Handling, Control, Abatement and Disposal Systems, including plate interceptors, dissolved air floatation devices, skimmers, hydrocyclones, clarifiers, chemical dosing systems, acid treatment and biological treatment systems, Spent Caustic Neutralisation Systems and Sewage Filtration/Treatment Systems, with component equipments, instrumentation and control systems.

7. All types of Air Handling Systems and Equipments, including plant/instrument air compressors, FD/ID fans, blowers, dehumidifiers, pneumatic systems, mixers, dryers, intake filters, vents, silencers, cyclones, stacks, manifolds, ducts, with drivers, auxiliary seal/lube/control oil systems, instrumentation and control systems.

8. All types of Fired Heaters and Boilers, with radiant coils and sections, transfer line assemblies, convection coils and sections, cross over/jump over pipes, fittings, tube sheets, tube supports, refractory materials, structural steel supports, casings, stacks, dampers, soot blowers, ducting systems, gas/oil/dual burner assemblies, burner tiles, waste heat boilers (WHB), steam generators, economizers, air/fuel preheat systems, FD/ID fans, fuel gas/oil skids, and including LPG vaporizers, steam superheaters, heat recovery steam generators, electric heaters, FCC flue gas coolers, steam reformers, CO boilers, circulating fluidised bed boiler, auxiliary boilers, process interheaters, thermal reactors, thermal incinerators, coke feeders, limestone feeders, ESP/baghouse filters, alongwith associated instrumentation & control systems, including burner lighting, flame detection and burner management systems.

9. All types of Compressors, including axial, centrifugal, diaphragm, reciprocating, rotary screw and sliding vane type compressors, for gas, air, hydrocarbon and all special services including FCC Power Recovery Trains (PRT), LPG vapour return blowers, with drivers of motor or steam turbine or expansion turbine or engine or gas turbine or hydraulic turbine types, speed governor systems, seal/lube/control oil systems (skidded or otherwise), gear assembly, bearings, barring gears, clutch, couplings, intercoolers, after coolers, suction filters, instrumentation & control systems including vibration monitoring anti surge control, inlet guide vane control, sequencer control, control panel and machine condition monitoring systems.

10. All types of Heat Exchangers, including shell and tube, double pipe, kettle, plate welded plate, high pressure (breech lock), Armstrong and brazed types, with plain or fin or High Flux or U tubes for cooling intercooling, trim cooling, chilling, condensing, crystallizing, heating, vaporizing or reboiling services, with tubes, tube sheets, head assemblies, shells, flanges, bolts and nuts, gaskets, baffles, tie rods, instrumentation and control systems.

11. All types of Air Cooled Exchangers, for cooling, intercooling, trim cooling, chilling and condensing services, with plain/finned tubes, of carbon steel, admiralty brass, alloy steel, stainless steel, monel or titanium or other materials, with fans, fan drivers, structural steel support frameworks, instrumentation and control systems, anti vibration systems.

12. All types of Agitators and Mixers, including static, jet, dilution types, motor drivers, aeration systems, with instrumentation and control systems.

13. All types of Filters, Screens and Strainers, including backwash, bucket, carbon, cartridge, duplex, pressure / mechanical, rotary, drum, sand, sock/bag, vaccum types, and special FCC net bottoms catalyst filters, screens, strainers, demisters and sea water clarifiers, with instrumentation and control systems.

14. All types of Vaccum Producing Equipments, including ejectors, educators, venturies, with instrumentation and control systems.

15. All types of Materials Separation systems, including cyclones, centrifuges, coalescers, dust collectors, electrostatic precipitators, oily water separators, flocculators, and specialized systems of Crude Oil Desalters, Reactor Cyclones and Regenrator Cyclones for FCC, third Stage Separators and Fourth Stage Cyclone Separators for FCC, with vessel internals, grids, distributors, supports, instrumentation and control systems.

16. All types of Materials Transporting Equipments, including loading and unloading arms and racks, gantries, dispatch tanks, loading / transfer pumps, hydraulic systems, weigh bridges, Diesel shunters, feed or injection or spray nozzles, skimmers, soot blowers, with instrumentation and control systems, including load cells and metering stations.

17. All types of Electrical Equipments including switchyard equipments, transmitters, relays, solar power systems, including solar panels, batteries and charger, phase shift monitors, motor or steam turbine generators, protection relays for generators, auxiliary seal/lube/control oil systems, actuators, annunciators, lighting masts, lighting fittings, panels, batteries and battery chargers, bus ducts, all types of cables including power/instrument/compensating/fibre optic/coaxial/control cables, cable joints, capacitors, distribution boards, fittings, substations, grounding/neutral resistors, heat tracing systems including insulation, microprocessor based process controllers, local control stations, motor control centres, power control centres, HT/LT motors, shock eliminators, HT/LT switch gears, transducers, HT/LT transformers, UPS and variable speed drivers over current protection devices, instrumentation and control systems including load distribution and management systems and auxiliaries, (skidded or otherwise).

18. All types of Materials Handling Equipments including belt or pneumatic conveyors, ducts, hoists, bucket or jib cranes, (with or without gangways), pipe and hoses, funnels, hoppers, disengaging lock hoppers, catalyst addition pots, valves and sampler devices, bagging, weighing and bag stitching systems, weigh bridges, buoy systems for crude oil receipt, pipeline and manifolds with valves, fenders, mooring aids, laser docking systems, product tanker loading facilities, with associated equipments, instrumentation and control systems, and auxiliaries.

19. All types of coke handling and storage equipments, including coke crushers, coke cutting systems, coke drum unheading devices, coke drum switching systems, coke conveyors, stackers and reclaimers, silos/hoppers, dust abatement systems, belt weighers, Sulfur Handling and Storage Equipments and Sulphur Granulation or Flaking or Prilling Systems with associated equipments, instrumentation and control systems and auxiliaries.

20. All types of Product Filling Systems, including LPG bottles filling machines and bitumen drum filling machines, and associated equipments, instrumentation and control systems and auxiliaries.

21. All types of injections and Dosing Packages, for Injection or metering or dosing of chemicals, additives, inhibitors, odourisers, oxygen scavengers, blocides, chlorine, polymers, caustic, acids, emulsifiers, antifoams or antifoulants, with their component equipments, like drums, tanks, pumps, instrumentation and control systems, auxiliaries (skidded or otherwise).

22. All types of Pumps, including API or non-API, centrifugal , diaphragm, in-line, jockey, vertical, booster, barrel, gear, Sundyne, screw, ram, reciprocating or submersible types, single stage or multistage types, for petroleum crude or intermediate products or petroleum products and byproducts, water including sea water and boiler feed water, chemicals, slops or sludge services, liquid booster for LPG (cryogenic), with motor or steam turbine or hydraulic turbine or diesel engine drivers, and instrumentation and control systems, auxiliaries, including seals flushes, gear boxes, water cooling harnesses and lube oil consoles.

23. All types of Tanks and Storages, including plate materials, flanges, fasteners, nozzles, fittings and other components for assembly/construction/erection at site, and instrumentations, including relief, breather, and rim vent values, nitrogen blanketing systems, roof drain pipings, rim seals, flame arrestors and automatic tank gauging systems, for oil, hydrocarbon (petroleum crude, products, byproducts, intermediate and blend components), water, chemicals, slops, sludge storage in either cone, fixed, floating, dome or internal floating roof configurations, solids storage in silos, bins or hoppers and LPG/propylene/ethylene/propane/butane storage in spheres, bullets or cryogenic tanks, and instrumentation and control systems.

24. All types of Columns, either supplied separately or together, comprising of grids, screens, distributors, nozzles and their supports/fasteners and accessories, for services like absorption, desorption, stripping, fractionation, distillation, splitting, stabilization, extraction, washing or scrubbing services, and column internals comprising of trays either bubble, jet, multi downcorner (MD), sieve or valve trays, or either random or structured type packings, and their appurtenances, instrumentation and auxiliaries.

25. All types of Vessels and Drums, either supplied separately or together, comprising of shells, heads, internals, grids, screens, demisters, coalescers, boots, distributors, packing and their supports/fasteners and accessories, for storage, separation, reaction, mixing, decoking, degassing, flashing, draining, blow down, desuperheating, drying, sealing, receiving, surge and interface controlling services, and their appurtenances, instrumentation, insulation and auxiliaries.

26. All types of Reactors, either supplied separately or together, comprising of shells, heads, catalysts, support materials, grids, screens, demisters, coalescers, distributors, packings and supports/fasteners and accessories, for carrying out cracking (FCC Reactor and Spent Catalyst Stripper), coking (Coke Drums), visbreaking, hydrotreating, hydro desulphurization, hydrocracking, catalytic reforming (Platformer), shift, sulphur (Claus), adsorption (CBA, PSA), oxidizing, treating (Merox), regenerating (FCC Regenerator/Combustor), desulphurising reactions, spray and mixing nozzles and their appurtenances, instrumentation and auxiliaries.

27. All types of Instrumentations, including various types of level/pressure/density/temperature/flow instruments, detectors, level/pressure/draft/temperature gauges, capacitance/level/limit, proximity switches, transmitters, annunciators, controllers, converters, transducers, temperature sensor assemblies, load cells, orifice assemblies, rotameters, pitot tubes, venturies, meter runs, control/metering panels, pneumatic/motorised/hydraulic/piston actuators, recorders, solenoid operated valves, transmitters, thermocouples, temperature elements, sight glasses, amplifiers, annubars, barriers / isolators, all types of flow meters, custody transfer meters, meter provers, density meters, electromechanical/magnetic/nuclear/radar/ultrasonic level indicators, weighing and bagging systems and test equipments for testing and calibration of above instruments.

28. All types of Transmitters and Monitors, including electronic transmitters for measurement of level, pressure, flow speed, temperature and weight, and monitoring systems for ambient air, fugitive emissions, pipelines, speed, stack emissions and vibration.

29. All types of Control Equipments, including ball/butterfly/gate/globe/needle/plug/bellow sealed type control valves, shutdown valves, self actuating, solenoid, on/off, fast acting quarter turn, pressure regulating, breather and pressure/vaccum relief valves, pilot operated safety valves, and valves for specialised services, such as catalyst addition systems and lock hopper control systems.

30. All types of Control Hardware and Software Systems, including Distributed Control Systems (DCS), Emergency Shutdown Systems (ESD), Programmable Logic Controllers (PLC), Security and Access Systems, Terminal Automation Systems, Advanced Process Control (APC) Systems with Real Time Optimizer (RTO), Supervisory Control and Date Acquisition (SCADA) Systems, and Refinery Information Management System (RIMS) with operator panels, computers, date loggers, interfaces, relay cabinets, engineering controls, large display screens, microwave transmission and receiver equipments, logic multipoint recorder/multiplexers, and their hardware and software

31. All types of Fire and Gas Detection Systems, consisting of LEL/fire/smoke/UV/gas/IR/toxic detectors, panels, cables, weather protection housing, junction boxes, detector cards, cabinets, calibration equipments, beacons and lights, and their hardware and software.

32. All types of Pipes, Tubes and Hoses, including cladded, coated, lined, made of carbon steel, low temperature carbon steel, alloy steel, stainless steel, GRP, copper, aluminium HDPE, PP, fibre glass, monel incolloy, titanium or any other materials, and other in seamless or welded construction, for all applications fields joint coating materials, with instrumentation and control systems like pipeline surge relief systems, auxiliaries, painting and insulation.

33. All types of Pipe Fittings, including elbows, connectors, tees, pipe fabrication accessories, spargers, nozzles, plugs, packing glands, rings, flanges, gaskets, supports, pads, manifolds, siphons, shock absorbers, struts, fasteners, mitre/long radius/short radius bends, sockolets, weldolets, spray nozzles, graylock fittings, swagelock/compression fittings, insulating kits, special steam traps, liquid float traps, bellows, flexible hoses, couplings, vent silencers, and speciality items like Teflon sliders, standpipe expansion joints, spring supports/hangers, scraper tees, pipeline and manifolds with valves, cleaning/scraping/monitoring pigs, pig launcher, pig receiver and pig detection system, cathodic protection system with sacrificial anodes and CP monitoring system, with instrumentation and auxiliaries.

34. All types of valves, including ball, butterfly, check, diaphragm, gate, double disc or knife gate,, globe bellow sealed globe, jacketed, plug, through conduit type valves, with manual/gear/motor/hydraulic operations, for oil, water, steam, hydrocarbon, chemical, cryogenic, subsea, nitrogen blanketing and thermic fluid services, and specialised services valves, like FCC butterfly valves, Cooker switch valves, standpipe slide valves, flue gas divertor valves, pressure reducing station systems, pipeleine and manifolds and riser tie-in manifolds.

35. All types of Gaskets and fasteners, including anchor/foundation/structural bolts, flanges, studs, nuts, washers, and metallic/soft/spiral wound gaskets and O-rings.

36. all types of Structural Steels, Materials and Plates including carbon steel/LT carbon steel/alloy steel/stainless steel plates, bars, rolled sections, tubular sections, HYSD bars, dampers, prefabricated tresties, pipe bridges with pre-installed pipes, loading platforms, steel A frames, blast proof doors, steel tubulars, seamless and welded, special steel piles, dolphins, low, medium and high strength steel, fasteners, and special application refractory/copalite/sulphide resistant quick setting cements.

37. All types of ferrous or non-ferrous pre-fabricated/semi-fabricated, Plant Structures, including pipe racks, supporting frames, trestles, pipe bridges with pipes pre-installed and pre-insulated.

38. All types of Analyzers, either on-line or off line, for measurement of H2S, Oxygen, NOX, SOX, CO2, CO, hydrocarbon, dew point, density, conductivity, pH, combustible gases, oil in water, vapour pressure, silica, sodium, distillation, flash point, moisture, viscosity and smoke point, and analyzer sampling systems/cubicles, analyzer houses with sample conditioning systems, sample probes/sensors, tubings, HAVC systems, calibration gases cylinders and Drager tubes.

39. All types of Laboratory Equipments, including sampling, quality control and analytical equipments for testing and measurement of various petroleum crude/products/by products quality parameters, and including sample collection equipments, gas/ion chromatograph, CFR engines for octane and cetana number, pulse NMR, spectrophotometers of different types, distillation equipment systems, analyzer management systems and laboratory information management systems, with instrumentation, auxiliaries, hardware and software.

40. All types of Safety and Fire Fighting Equipments, for safety of personnel and plant and machinery including fire suits, fire monitors, Q.B. bulbs, spray nozzles, ambient air monitors, heat and flame resistant clothings, portable extinguishers, deluge skid systems, explosimeters, rupture discs, fire fighting systems, fire tenders, foam systems with foam storage and monitor, transport and booms, snorkels, sprinkler systems, breathing air apparatus, fire proofing materials for passive fire protection of steel structures and oil spill protection booms, with auxiliaries.

41. All types of Communication Equipments, including cables, bone mikes, frequency synthesizers, meteorological instruments, microwave transmission and receiving equipments, public address systems, intrinsically safe walkie-talkies, UHF/VHF multi-channel communication systems, radio telemetry systems, with remote telemetry units, portable units and PC based master telemetry units and antenna systems.

42. Initial charge of all types of catalysts, deslocants, zeolites, activated carbons, clay molecular sleves, used in refining and processing of petroleum crude, petroleum products and by-products.

43. Software Support Systems, including training simulation systems, electronic documentation systems, CAD stations, date tapes, operation/maintenance/safety manuals, scanners, plotters, printers, software including licenses, specifications, drawings, technical literature, and their hardware and software.

44. Special Maintenance Systems, including hydro-jetting tools, pneumatic torque wrenches, EOT/mobile cranes, hoists, grinders, high pressure cleaning systems, induction bending machines, auto welding machines, various welding equipments like girth welding, vertical flux cord, bottom saw, four-side edge preparation, angle rolls, rolling and levelling machines, sky climbers, hot tapping machines, bolt tensioners, high pressure test pumps, tube bundles pullers, tube nippers, ultrasonic leak detectors, machine condition monitoring systems and associated sub-assemblies, vibration analysers and computerized alignments systems.

45. Sub-assemblies, tools, accessories, protective coating/paint materials, stores, spares, materials, supplies, consumables for running, repairing or maintenance of the goods specified in this List.

List 18 (See S. No. 230 of the Table)

(1) Hot mix plant batch type with electronic controls and bag type filter arrangements more than 120 T/hour capacity

(2) Electronic paver finisher (with sensor device) for laying bituminous pavement 7 m size and above

(3) Slip form/fixed form paverfinisher for laying concrete pavement

(4) Surface dressing equipment (self propelled) (chips spreader)

(5) Slurry seal machine for filling up cracks in roads

(6) Kerb laying machine

(7) Mobile bridge inspection unit

(8) Mechanical broom with blower

(9) Toll collection and traffic control equipment

(10) Electronic Total station instrument for topographic survey

(11) Global Positioning System (GPS) Instrument

(12) Stone crushing (cone type) plants

(13) Concrete Batching plants 50 cum/hr or more

(14) Hydraulically operated self propelled piling rig with accessories

(15) Hydraulically operated rough terrain self propelled 100 tons crane with telescopic boom

(16) Hydraulically operated self propelled soil boring equipment with casing pipes for deep earth anchor

(17) Mobile concrete pump placer of 90/120 cu m/hr capacity

(18) Automatic asphalt extraction equipment

(19) Fully automatic, hydraulically operated, pre-cast segment moulds

(20) Hydraulic gantry crane of 100 tonnes capacity for launching truss

(21) Skid steer loaders

List 19 (See S. No. 231 of the Table)

(1)Rail Mounted Quay Crane(RMQC) including Post Panamax RMQC

(2) Rubber Tyred Gantry Crane

(3) Rail Mounted Gantry Crane

(4) Marine loading/unloading arms

(5) Single Point Mooring and Single Buoy Mooring including pipelines

(6) Generator Engine with Alternator of 500 KVA and above

(7) Self-Priming centrifugal pumps of 1000 cu.m. and above

(8) Vessel Traffic Management System

(9) Trailing Suction Hopper Dredger

(10) Fire fighting system (water type and foam type)

(11) Davit, Work-Boat and Life Raft

(12) Navigational equipment

(13) Radio communication equipment

(14) Buoy light

List 20 (See S. No. 232 of the Table)

(1) Navigational/ Communication Aids

(2) Airfield Crash Fire Tenders and other fire fighting vehicles

(3) X-Ray machines and other equipments needed for airport security systems

(4) Passenger Boarding Bridges (Aerobridges) along with associated Visual Guidance Docking Systems

(5) Elevated Transport Vehicles

(6) Baggage Conveyor System

(7) AC Plant of capacity more than 200 TR

(8) Escalators

(9) T-5 Triphosfor Tube

(10) Flight Inspection System (Ground and Air)

(11) Runway Marking and Pavement Testing Machines

List 21 (See S. No. 234 of the Table)

I. Kitchen Equipment:

(1) Dough Kneading Machine

(2) Dough Dividing Machine

(3) Electric Egg Boiler

(4) Band Saw Machine for cutting Meat - Fish Bones etc.

(5) Meat cutting slicing Machine / mincing and grinding machines (capacity 300 kg per hour)

(6) Meat tenderising machine

(7) Silver burnishing and polishing machine - small and large table ware

(8) Commercial heavy duty can opener ( motorised )

(9) Smoker

(10) Salad dryer

(11) Vertical chopper

(12) Ice flakers

(13) Waffle Irons

(14) Bread buttering machine

(15) Vertical cutter and mixer

(16) Cold beverage dispenser as manufactured by jet spray

(17) Planetary mixer - heavy duty

(18) Dough sheeter and cutter

(19) Sandwich unit

(20) Butter portioning machine

(21) Automatic glass washing machine

(22) Chinese range with steamers

(23) Vaccum packing machine

(24) Glass dispenser

(25) Vegetable preparation and washing machine

(26) Conveyor table

(27) Bread - Slicing Machine

(28) Roll - in - Refrigeration (Absorption type) or Mini Bars

(29) Baking ovens - gas fired

(30) Ice cubes machines over 1000 lbs. capacity

(31) Potato peelers

(32) Potato chipper

(33) Coffee machine

(34) Dish washing machine

(35) Glass washing machine

(36) Luckon hot plate

(37) Plate dispenser

(38) Toaster - Conveyor type

(39) Tilting frying table / pans

(40) Tilting boiling pan

(41) Croissant machine

(42) Deck oven, Pizza oven, Convection oven and Rotating ovens, for baking

(43) Microwave ovens

(44) Banquet Trolley( Refrigerated)

(45) Cocktail mixer / beverage mixer

(46) Juice dispenser

(47) Walk - in Coolers and Freezers

(48) Gas Ranges with ovens / flame failure device

(49) High pressure hot water cleaning jets

(50) Puree machines

(51) Deep fat frier with thermostatic control ( gas operated)

(52) Deep fat frier with thermostatic control ( electrically operated)

(53) Vegetable cutting / dicing machine

(54) Energy saving steam cooker (double / quadruple type)

(55) Hamburger machine, pastry rollers and noodle makers

(56) Chocolate coating units

(57) Pastamatic machines

(58) Cold cut Slicer

(59) Sausage making machine

(60) Waste food disposal machine

(61) Flambe trolley

(62) Vegetable steam cooker

(63) Draught beer dispensing unit

(64)Chinese Banquet Silverware.

(65) Infra Grill

(66) Heavy duty salamander ( Gas / Electrical )

(67) Blast Freezer.

II.Health Club Equipment:

(68) Rowing machine

(69) Orbital massagers

(70) Abdominal board

(71) Steam bath

(72) Jogomatic motorised treadmill

(73) Butter-fly machine

(74) Slendertone shinning equipment

(75) MSA Oxygen administrator complete with cylinder / face mask

(76) Power Jog machine.

III. Laundry Equipment:

(77) Dry cleaning presses

(78) Extractors - 65 lbs.

(79) Washer extractors ( more than 100 lbs.)

(80) Multi-purpose presses and utility presses

(81) Garment finisher

(82) Steam finishing boards

(83) Marking machines

(84) Water-spray gun and air vaccum system

(85) Vaccum unit

(86) Spotting Board

(87) Tumblers ( Hot oil operated/Steam heated) Dryer (Programmable)

(88) Flat work iron ( (Hot oil operated / Steam heated)

(89) Steam Cabinet unit

(90) Shirt Unit ( i.e. Sleeves, Body and Bossom Collar and Cut Press, etc.)

(91) Upholstry processing machines viz. , perfect pleet machine and curtain stretcher.

(92) Puff iron

(93) Lint Separator.

IV. House Keeping Equipment:

(94) Industrial type vaccum cleaner

(95) Carpet shampooing machine

(96) Drying machine ( for carpets)

 

 

(97) Breathing apparatus for fire fighting

(98) Smoke / fire detectors & sprinkler systems

(99) Portable motorised deodoriser m/c.

(100) Fogging machine for fire fighting

(101) Papoosing machine

(102) Pile lifter

(103) Floor Polishing Machine, Floor Scrubbing Machines

(104) Insect and Pest Killers

V. Energy Saving Devices:

(105) Tinted glass

(106) Centrifugal Heat Reclaim Machine

(107) Double Effect Absorption Machine for Air-conditioning

VI. Miscellaneous Equipment:

(108) Locks and keys with emergency / construction keys and emergency Escape doors

(109) Gas Leak detector

(110) Digital temperature gauge

(111) 6600 Vol. 1100 volts high tension magger and insulation testing kit

(112) Magnetic locking devices sliding folding partition

(113) Ultra high pressure washer with accessories for coil cleaning drain cleaning

(114) Garbage incinerator with heat recovery unit ( steam hot water) boiler with accessories

(115) Sterasyl water filter for drinking water - or equipment using silver iodide

(116) Submerged swimming pool cleaner ( with motor of extra low voltage 40 volts) unit with accessories - complete set

(117) Fireman suit.

(118) Electronic liquid level indicator

(119) Hand Driers.

(120) Garbage compactizer

(121) Bottle Crusher

(122) Sauna Heaters and Saunas

VII. Front Office Equipment:

(123) Electric locking system

(124) Key cutting machine

(125) Computerised electronic vaults

List 22 (See S. No. 239 of the Table)

(1) Telephonic or telegraphic apparatus of the following description:

(a) Switching apparatus for cellular mobile telephone service

(b) Base station controllers

(c) ATM Switches

(d) Frame Relay Switches

(e) Ethernet Switches

(2) Apparatus for Carrier Current Line System or Digital Line System of the following description:-

  1. HDSL System

  2. Dense Wave Division Multiplexing(DWDM) System

  3. Routers

(3) Radio communication equipment including VHF, UHF and

microwave communication equipment of the following description:-

  1. Base Transreceivers stations (BTS)

  2. Satellite communication equipment; the following customer premises equipment, namely:-

  1. Radio with LNA,up converters and down converters

  2. Satellite modems

  1. BTS ancillary equipment of the following description,-

  1. Cellular repeaters

  2. Amplifiers

  3. Wave Guides

(4) Network management stations

(5) Computers for billing and customer services

(6) Short message service hardware

(7) Automatic call distribution system

(8) Transcoders

(9) Test equipment

Note:- Goods specified against item 1(a) is to be imported only by Cellular Mobile Telephone Service Licensees

List 23 (See S. No. 240 of the Table)

(1) Paging control terminal

(2) Transmitter controller

(3) Paging transmitter

(4) Link transmitter/link repeater, monitor receiver

(5) Link receiver

(6) N+1 Arbitrators for the above, hot standby panel

(7) Combiners

(8) Automatic monitoring system

(9) Network management & control system

(10) Integrated ACD/OAP system

(11) Isolators

(12) Cavity filters

(13) Multicouplers

(14) Directional power sensors

(15) Communication analysers

(16) Radio communication test set up, spectrum analyser, field strength meter

(17) POCSAG or FLEX encoders

(18) Global positioning system

(19) Simul cast controller

(20) Automatic call distribution equipment/system

List 24 ( See S.No 241 of Table)

  1. Controller (Dispatch) of the following description:-

    1. Network Controller, Master Controller

    2. Line Conditioner for controller

    3. Computer for Network Management and Control System, System Watch

    4. Processor Controller Frame, Shelves

    5. Network Interface Module

    6. Voice Tone Module

    7. Dispatch Application Processor

    8. Metro Packet Switch

    9. Digital Cross Connect Switch

    10. Advance Packet Duplicator

    11. Building Integration Timing System

(2) Telephonic or telegraphic apparatus of the following description, namely;-

Base Station Controllers

(3) Radio Communication equipment including VHF,UHF and Microwave communication equipment of the following description, namely:-

Base Transreceivers Stations(BTS)

(4) Trunked Repeaters(multiple repeaters required operations)-

  1. Repeaters,350/400/800Mh,20-100 Watts

  2. Line Interface Module

  3. Repeater Programming kit and cable

  4. Extender Card, extender cable

  5. Repeater Module Packing kit

(5) Antenna System equipment

  1. Tower top pre-amplifier

  2. Bi-directional amplifier

(6) Voting Equipment

  1. Voter Cable

  2. Audio Revert Option Kit

  3. Receiver decoder module

  4. SMC main site RDM

  5. Receiver Voter Module

  6. Remote Multiplexer Module

  7. Voter Diagnostic Module

  8. RDM Test Cable

  9. Satellite Power Supply

(j) Central demix Module

(k) Voter Shell Assembly

(7) Field Programming kit-

  1. Radio Interface Box(RIB)

  2. RIB to Repeater Cable

(8) Computer for billing and customer services

(9) Short Message Service Hardware

(10) Automatic Call Distribution System

(11) Transcoders

(12) Test equipment

List 25 (See S. No. 243 of the Table)

(1) Micromanipulators

(2) Molecular beam expitaxy system (MBE system)

(3) Chemical vapour deposition (CVD) system - Low pressure CVD (LP CVD) - Metal organic CVD (MO CVD)

(4) High pressure oxidation systems

(5) Lithography systems

(6) Direct step on wafers / steppers

(7) X-ray lithography systems

  1. E-Beam mask making system

(9) E-Beam direct write system

(10) Mask aligners

(11) Mask inspection systems (comparators)

(12) Wafer scriber or Wafer slicer or Wafer sawing machine or Wafer fractures or any combination thereof

(13) Die bonders or wire bonders or combination thereof

(14) Wafer sawing machine

(15) Leak detection system

(16) Clean room air showers

(17) Particle monitor / counter both air and liquid borne

(18) Automatic encapsulation system, Automatic marking / branding machine

(19) Clean room laminar flow air handling system

(20) Ultra clean room equipment

(21) Ultra high purity demineralised water treatment plant

(22) PVDF welding and orbital welding machines

(23) Ultra high pure (UHP) gas distribution system

(24) Toxic gas distribution / monitoring system

(25)Fourier Transform Infra-red (FTIR) Spectrophotometer for measuring Epitaxy Thickness, Boron and Phosphorus weight percentage

(26) Parts of FTIR instrument

(27) Interferometer and nano-scan meter for measuring deposited metal or oxide thickness

(28) Ellipsometer for measurement of refractive thickness, thickness of layers deposited on semi-conductor wafer

(29) De-Oxo purifiers and puridriers and Hydrogen, Nitrogen, Oxygen and Argon gases

(30) Hydrogen, Oxygen and Nitrogen gas generators and accessories for producing high purity process gases for semiconductor wafer/device manufacture

(31)Automatic lead frame loaders for semiconductor devices

(32) Mercury probing apparatus and accessories for measuring oxide purity and carrier concentration of semiconductor wafers

(33) Parts of mercury probing apparatus

(34) Fume scrubbers for toxic process gases used in semiconductor industry

(35)Apparatus for profiling and measurement of the surface including topography of semiconductor wafers and /or any layers deposited on it.

(36) Mass Flow Controllers (MFC) and Source Vaporiser for various process gases used in semiconductor wafer processing

(37) RF Generator for Epitaxial Reactors heating

(38) Parts of RF Generator

(39) Equipment used for quality control namely Burn-in Systems, moisture monitors and parts thereof

(40)Tools for Moulding, Cutting, Trimming operations used in the semiconductors manufacture

(41) Apparatus for the measurement of dynamic electrical parameters of Semiconductor wafer devices

(42) Apparatus for measuring physical parameters of junction in semiconductor wafter

(43) Automatic trim and form/die equipment for semiconductor devices

(44) Electro polished SS pipes, Swagelok fittings, nupro bellows valves, manual shut-off valves, non-return valves, high purity gas and chemical filters

(45) Optical pyrometer for measuring infra-red radiated temperature

(46) Gas Chromatograph/Analyzer for analysing purity of process gases

(47) Toxic gas monitors and Alarms

(48) Milli-Volt generator for temperature profiling of diffusion furnace used in semiconductor industry

(49) Curve Tracer for measurement of dynamic electrical parameters of semiconductor wafers/devices

(50) Apparatus for measurement of life time carriers/Switching time for semiconductor devices

(51) Contact Printer for photomask

(52) Die sheer Tester

(53) XRP Tester for inspection of the Moulded / Encapsulated devices for finding out the defects.

(54) Trace Moisture Analyzer / Dew point analyser for measuring moisture contents in PPMS

(55) UV light intensity measurement apparatus in semiconductor manufacture

(56) Critical Dimension measurement system for Mask making

List 26 (See S. No. 244 of the Table)

(1) Capacitors (excluding paper capacitors and power capacitors)

(2) Ferrite parts including memory cores and ferrite magnets

(3) Switches with contact rating less than 5 amperes at voltage not exceeding 250 Volts AC or DC

(4) Connectors

(5) Magnetic -Heads (all types)

(6) Deflection parts, namely:-

(i) EHT/LOT/FBT transformers

(ii) Line driver transformers

(iii) Deflection coil / yoke

(iv) Linearity coil

(v) Width coil

(7) Ceramic / Magnetic cartridges and stylus

(8) Air cored and Ferrite cored transformers

(9) Microphones /Microphone cartridges

(10) RF/IF coils, Inductance coils, Peaking coils, Tuning coils

(11) Antennas

(12) Relays of contact rating upto 7 amperes

(13) EHT cables

(14) Level meters/level indicators/ tuning indicators/ peak level meters/ battery meter/ VC meters / Tape counters

(15) Tone arms

(16) Microwave passive parts

(17) (i) Saw filters (ii) Ceramic filter/trap (iii) Delay lines (iv) CRT socket (v) Spark gap (vi) Degaussing coil

(18) Fibre optics and other optoelectronic parts and devices namely, Couplers, Attenuators, Connectors, Splicers, Multiplexers and Demultiplexers

(19) Passive optical parts, namely, Microlens and splitters, Micropositioners, Optical filters and gratings and Phase plates

(20) Special purpose optical fibres, namely, polarisation holding fibres, plastic fibres and large core fibres

(21) Electron guns

(22) Liquid crystal displays

(23) Loudspeakers (cone type)

List 27 (See S. No. 245 of the Table)

(1) Television cameras with portable field video recorders (professional grade)

(2) Audio recording equipment

(3) Table top post production video editing machines

(4) Four source editing controllers to control editing machines

(5) 8-channel video mixer/switches

(6) Special effect generators for fading and superimposing of text and graphics

(7) Time base correctors / Frame synchronisers

(8) Broadcast standard 3-D computer graphic systems

(9) Professional grade colour video monitors

(10) Portable lighting equipment with lamps for shooting in low light situation

(11) Professional grade photographic cameras of all formats

(12) Dark room equipment including enlargers

(13) Computer control editing machines

(14) Spares and accessories of above mentioned equipment as permitted by the Deputy Principal Information Officer in the Press Information Bureau in the Ministry of Information and Broadcasting

 

List 28 (See S. No. 248 of the Table)

 

(1)UV/Visible spectrophotometer, either with PDA and/or kinetics measurement and low bandwidth,

(2) Preparative chromatographic system,

(3) Chiral columns and other HPLC columns for specific application,

(4) X-ray diffraction equipment,

(5) Capillary electrophoresis,

(6) Robotic sample processing system,

(7) Particle size analysers, laser diffraction, lights scattering and photocorrelation spectroscopy types,

(8) Atomic absorption Spectrophotometer,

(9) Tensiometer,

(10) Moisture balance,

(11) Elemental analyser,

(12) High Precision Auto titrator, (13) TOC Analyser,

(14) Ion Chromatograph, (15)Spectrofluorimeter.Luminescence meter,

(16) Parenteral particle counting system,

(17) Particle shape analyser,

(18) FT-NIR Spectrophotometer, (19)FT-Raman Spectrophotometer, (20) Spectropolarimeter,

(21) Adsorption gas apparatus,

(22) Freezing point apparatus,

(23) Hot stage microscope,

(24) Osmometer,

(25) Porosity analyser,

(26) Sample preparation instrument, (27) Automated sampling devices, (28) Surface area analyser, (29)Multiple organic synthesizer (30) Focussed Microwave oven for ortoanic synthesis,

(31) Immersion cooling probe for 100 oc,

(32) High Pressure hydrogenator, (33) Gas generators,

(34) Automated dissolution test apparatus, including robotics,

(35) Stability chambers conforming to ICH guidelines,

(36) Rotational visco meter and Rheometer,

(37) Assembly for lontophoresis studies,

 

(38) Ultra filteration equipment,

(39) Diffusion cell apparatus,

(40) Densitometer,

(41) Sustained release apparatus, (42) Suppository testing device,

(43) Zeta potential analyser,

(44) Ultracentrifuge,

(45) Inverted microscope with fluorescence microscopy and photographic attachments,

(46) Transilluminator,

(47) Moodular protein electrophoresis apparatus (1D/2D), (48) Nucleic acid sequencer,

(49) Imaging densitometer,

(50) Fast-protein Liquid Chromatography,

(51) U.V. Crosslinker,

(52) Probe Sonicator

(53) Sintillation counters (Y and B), (54) CO2 incubator,

(55) Incubator shakedr for bacterial culture,

(56) Polymerase chain reaction machine,

(57) Cell harvestor,

(58) Speed Vac,

(59) Hybridizing oven,

(60) Protein sequencer, (61)Confocal microscope,

(62) Capillary electrophoresis,

(63) Electroporator,

(64) Scanning electron microscope, (65) Amino acid analyser, (66)Peptide synthesizer,

(67) Phosphor imager, (68)Fluorescence activated cell sorter,

(69)ELISA reader

(70) Fermenter,

(71) Spray drier,

 

(72) Protein purification set up, (73)Stimulator,

(74)Two channel organ bath (with two channel recorder accessories) (a) Isotonic transducer (b) Isometric transducer (c) Pressure transducer, (75) Plethymsometer,

(76) Blood pressure monitor,

(77) Blood pressure manual scanner, (78) Auto analyser,

(79) Biofuge,

(80) Passive avoidance apparatus with controller,

(81) Auto stainer,

(82) Microtome,

(83) Cell harvestor,

(84) Tissue embedding machine, (85) 4 channel auto track system, (86) Blood cell counter,

(87) Blood flow meter,

(88) Stereo toxic microscope,

(89) Microdialysis (pull-push counter),

(90) Radiotelemetric monitoring system, (91) High speed refrigerated research centrifuge,

(92) pH meter (3 decimal reading), (93) Microscope phase contrast,

(94) Microscope polarizing,

(95) Vacuum rotary evaporators with digital display and control, different sizes,

(96) Freeze drier (Lyophilizer),

(97) Precision pipetting devises, (98) Refrigerated bath,

(99) Low temperature circulatory bath (-33oC),

(100) Magnetic stirrer with precision temperature control and digital display, (101) Thermostatic blocks (Dry bath) with or without magnetic stirring facility."

 

List 29 (See S. No 249 of Table)

1) Analog and digital heavy duty video tape recorder and players

15) Modulators-analog and digital

2) Professional Video Monitors for studio use ( of resolution 800 lines and above) for video monitoring

16) Digital Encoders

3) Audio processors - compressor limitors, delay units, parametric equalizers, sound enhancers

17) Integrated radio receivers and decoders

4) Waveform monitors; Vectroscope

18) Audio/Video base distribution amplifiers

5) Video Processors such as timebase correctors and peripherals

19) Spectrum analysers

6) Audio/Video Mixing machines (Analogue or Digital)/Video switchers/Vision mixers

20) Automatic Testing and measuring instruments

7) Studio clock systems

21) VITS generators , encoders and decoders

8) Time code generator with remote display

22) Digital Oscilloscope

9) GPS based synchronous pulse generators with changeover switches

23) Metal racks for housing equipment specified in S.Nos 15 to 18 above.

10) Flexicart machine to hold video tape and automatic playout complete with hardware and software

 

11) Device control interface to control external electronic device

 

12) Video measuring instruments

 

13) Digital video noise reduction system

 

14) High power amplifier systems for 11Mt./9Mt. Parabolic dish antenna

 

List 30 (See S. No. 250 of the Table)

(1) Singeing machine

(2) Fabric reversing machine

(3) Yarn drying machine

(4) Volumetric/Gravimetric measurement liquid chemical station

(5) Lab dye preparation machine

(6) Lab infra Red Drying Machine

(7) Continuous weight reduction machinery through microwave technique

(8) Kier decatising/continous decatising machine

(9) Solvent scouring machine

(10) Blanket Fringing Machine

(11) Raising/Brushing Machine

(12) Circular Knitting Machine

(13)Industrial Sewing machine

(14)Single needle bed drop feed lockstitch machine

(15) Single needle lockstitch flat bed machine

(16) Single needle flat bed drop feed lockstitch machine with speed more than 3500 stitches per minute

(17) High speed twin needle feed lockstitch machine

(18) High speed two needle lockstitch machine

(19) Computerised multineedle lockstitch/chainstitch machine

(20) Single needle lockstitch machine with built in trimmer

(21) Blind stitch machine of various models

(22) Single needle drop feed chainstitch machine

 

(23) Two needle chainstitch or lockstitch machine

(24) Chainstitch overedging machine

(25) Two or three needle chainstitch machine

(26) Two thread chainstitch for high speed seaming and banding operation with gear driven pulled feed/compount feed of speed 3500 stitches per minute and above.

(27) Safety stitch machine.

(28) Power driven flat bed knitting machine

(29)Computerised flat bed knitting machine

(30) Power operated flat lock/overlock machine

(31) Linking machine

(32) Loop making machine

(33) Power driven socks knitting/gloves knitting machine.

(34) Whole garment making machine (knitted)

(35) Plain stitching machine with more than 3500 stitches per minute

(36) Computerised plain stitching machine with more than 3500 stitches per minute

(37) High speed needle feed two needle flat bed industrial sewing machine.

(38) Sewing machine zig-zag flat bed

(39) High speed multiple needle sewing machine

(40) Class feed of the arm industrial sewing machine.

(41) Button hole sewing machine

(42) Button stitch sewing machine.

(43) Elastic inserting machine (on a variety of garments)

(44)Belt attaching machine

(45) Zip attaching machine

(46) Bar tacking machine

(47) Hemstitch machine

(48) Smoking machine

(49) Power driven cloth cutting machine.

(50) Band knife cutting machine

(51)Collar turning and blocking machine and cuff turning and blocking machine.

(52) Cuff press

(53) New automatic collar turning machine

(54) Automatic pocket weld sewing machine

(55) Pocket creasing machine

(56) Embroidery machine with 10 heads and above

(57) Computerised embroidery machine

(58) Printing and curing machine

(59) Quilting machine

(60) Snap fasterns fixing machine and/or siwa thereof

(61)Thread cleaning machine

(62) Steam Press

(63)Portable boiler for steam press

(64) Steam Cabinet

 

(65) Vaccum table

(66) Fusing press

(67) Dry to Dry cleaning machine

(68) Stain/spot removing machine/gun

(69) Automatic 25-needle shirring/smoking machine

(70) Shirt folding machine

(71) Form finisher

(72) Collar contour trimmer

(73) Spreading machine

(74) Shoulder pad attaching machine.

(75) Shrinkage controlling machines for knitting fabrics

(76) Loopdrivers for tubular knitted fabrics

(77) Mercerising machines for tubular knitted fabrics

(78) Singeing machines for tubular fabrics.

(79) Pile cutting machines for knitted fabrics

(80) Rotating edging machine for fabric rolls

(81) Conveyors for garments

(82) Garment Calendering machine

(83) Tie making machines

(84) Labelling machines

(85) Laying and cutting machines

(86) Button and Rivet fixing machine and/or dies thereof

(87) Weft straightening and calendering machine

(88) Slit Opening Machine

(89) Lab Yarn dyeing machine

(90) Lab dyeing machine

(91) Lab pressing machine

(92) Automatic cone winding machine with yarn splicer and auto doffing system

(93) Drawing in machine

(94) Computer aided design system

(95) Fully automatic grey fabric inspection machines with roll to roll winding having microprocessor recorder

(96) Colour matching computer

(97) High speed Intersecting Rotary/Chain/Pin Drawing Sets/Gill Boxes

(98) Rectilinear Combs

(99) Draw Frame/Roving Frame/Automatic Rubbing Frame/Bobbiners/Finishers, for use in woollen textile industry

(100) Ring frames from 60 MM Ring Dia and above, for use in woollen textile industry

(101) Ring Frames with Siro Sp-inning attachment / Auto Doffers having maximum 75 MM Ring Dia, for use in woollen textile industry

(102) Shearing, polishing and cropping machines

(103) Step cleaner

(104)Flax hackling machine

(105) Drawing machine for Flax

(106)Roving machine for Flax

(107) Wet ring frame for Flax

(108) Auto winding machine for Flax

(109) Continuous spinning machines for Viscose Filament Yarn.

(110)Digital electronic frequency inverters for spinning machines including control boards

(111) Finishing oil metering pumps with relevant feed system

(112) Metering gear pumps for Viscose

(113) Portable systems for injection of pigments for viscose dope complete with stirred vessel, metering pumps, instruments and control panel

(114) Precious metal spinnerettes including distribution plates (pre-spinnerette)

(115) Spin bath degassinag plant by flash evaporation

(116) Spin bath backwash filtration system with candle filters

(117) Continuous dissolving and homogenisisng system for viscose preparation

(118) Contidisk filters for viscose

(119) Spinbath heat exchanger in graphite

 

 

List 31 (See S.No. 251 of the Table)

(1)Effluent treatment unit with biopaq reactor, activate sludge process, activated carbon, ultrafiltration ozonisation facilities

(2)Combined contipress/decatising machine

(3) Effluent treatment unit with automatic sensing devices, automatic controlled chemical dosing, dissolved

air floatation (DAF), reverse osmosis, sludge dewatering, decanters, ultrafilters, vacuum filters to deliver water for reuse.

(4)Hydraulic Flat Paper Press/continuous Hydraulic Flat paper Press/Rotary Press

(5)Fully fashioned high speed knitting machine

(6)Computerised Pattern maker/ Pattern grading/marker

(7) Computerised embroidery pattern-making machine with plotter

(8) High Speed Warping machine with yarn tensioning, pneumatic suction devices and accessories

(9)Shuttleless loom (air jet, water jet, rapier and projectile and narrow width high speed needle)

(10) Beam knotting machine

(11) Auto control type humidification plant

(12) Carding Sets, for use in woollen textile industry.

(13) Yarn/ Fabric mercerising machine

(14) Continuous bleaching plant

(15) Fabric dyeing machine complete with dye kitchen & accessories

(16) Wet fabric spreading and squeezing machine

(17) Relax drum/conveyer drying machine

(i) Drying range

(ii) Float dryer

(iii) Loop dryer

(iv) Drum dryer

(v) Jet dryer

(vi) Rapid dryer

(18) Compacting Machine

(19) HTHP Hosiery yarn dyeing machine complete with dye kitchen and accessories

(20) Soft package winders (dye package winders)

(21) Automatic dye weighing and dispensing machine

(22) Open width Tubular inspection machine

(23) Fastness testing equipment

(24) Shrinkage testing equipment

(25) Indigo dyeing range with/without sizing plant

(26) Computer colour matching equipment

(27) High speed computer control padding mangle

(28) Powder dot coating machine

(29) Laser engraver

(30) Pre-shrinking range for flat and Knitted goods

(31) Knit-tubular mercerising or bleaching-cum-mercerising machine

(32) Auto flame controlled, width controlled singeing machine for flat and Knitted fabrics

(33) Milling and scouring machine

(34) Shearing and Polishing machine

(35) Kier Decatising/Decatising machine

(36) Combined Contripress / Decatising machine

(37) Auto fabric detwister

(38) Rotary/Flat bed screen printing machine

(39) Curing/Polymerising machine

(40) Continuous rope/open width washing machine

List 32 ( see S. No 252 of Table)

(1) Automatic reeling machinery for reeling of silk consisting of continuous hot air drier(conveyer type), continuous cocoon boiling machine(conveyer type) and automatic reeling machine with re-reeling

(2) Silk weaving and twisting machines consisting of hank-to-bobbin cone winders, silk doubling machine, two-for-one/ three-for-one twisters, vacuum autoclave and rewinding machine for bobbin to hank and Electronic jacquard weft knitting machine

(3) Arm dyeing machine for hank degumming dyeing

(4) Hank dryers (continuous type)

(5) Silk felt calender

(6) Clip stenter

(7) Silk calender

(8) Silk decasting machine

(9) Overflow machine for silk fabric dyeing

(10) Cone-chees degumming and dyeing machine

(11) Beam dyeing machine for silk fabric

(12) Semi-automatic screen printing machine

(13) Loop agers

(14) Design studio equipment

(15) Colour kitchen equipment

(16) Colour matching computer

List 33 (See S. No. 255 of the Table)

(1) Connecting rod assembly

(2) Crank 1,2 and 3

(3) Piston ring set

(4) Coil ignition

(5) Ignition coil assembly

(6) Pin piston

 

(7) Rod connecting

(8) Pin crank

(9) Gear adjustment

(10) Lever tilt 2

(11) Handle gear shift

(12) Carburettor assembly

(13) Pinion

(14) Shift can assembly

(15) Lower casing assembly

(16) Propeller assembly

(17) Reed valve assembly

(18) Crank shaft assembly

(19) Fuel pump assembly

(20) Cowling bottom

List 34 (See S.No.257 of the Table)

(1) Air blast dust removing machine

(2) All types of staking machines except slocum (slow combing process)

(3) Automatic Drying machine

(4) Automatic Lacing machine

(5) Automatic Leather Perforating and/or Punching machine

(6) Automatic Lock-Stitching Cylinder Bed Bartacker

(7) Automatic machine to control, to slant and to glue leather straps

(8) Automatic Milling machine

(9) Automatic Milling-Boring Machine

(10) Automatic or semi-automatic hydraulic press (750 tonnes or more)

(11) Automatic Padding machine

(12) Automatic Spraying machine

(13) Automatic Tacks - Reinforce machine

(14) Automatic Work Unit for assembling the complete Insole

(15) Back Part Moulding machine

(16) Band-saw with or without Flier

(17) Bandknife Splitting machine

(18) Belt Punching and cutting machine

(19) Bobbin machine with counter

(20) Boot leg ironing machine

(21) Bottom Leather Grain Crack Tester

(22) Bottom roughing and/or scouring machine

(23) Box Stamping machine

(24) Buckle Stappling machine

 

(25) Button Hole (Eyelets end) machine

(26) Button Sewing machine

(27) Button stitch / Sewing machine

(28) Cementing machine

(29) Cementing machine and cementing gun

(30) Chain Slotting machine

(31) Channel Closing machine

(32) Channelling and Grooving machine

(33) Clicking Board levelling machine

(34) Clicking machine

(35) Clicking Machine Hydraulic (Bottom)

(36) Coloriemeter

(37) Column Boring machine

(38) Computerised Sewing Machine

(39) Computerised Skiving machine

(40) Conveyor system

(41) Counter Cementing Machine

(42) Counter Moulding machine

(43) Counter Tightening machine

(44) Coupling and edge pre-trimming machine

(45) Crimping machine

(46) Crumpling and embossing machine

(47) Curtain coating machine

(48) Cylinder Bed Sewing machine

(49) Die Bending machine

(50) Double Band Cleaning machine

(51) Dust removing machine-pneumatic/hydraulic

(52) Dyeing machine

(53) Edge buffing machine

(54) Edge Inking machine

(55) Edge Pre-Trimming machine

(56) Edge Setting machine

(57) Edge Trimming machine

(58) Elastic inserting machine on variety of garments

(59) Electrical machine for cutting and slanting straps

(60) Electro pneumatic weaving machine for leather

(61) Electronic skin assessor

(62) Embossing Plates for Press for leather printing

(63) Engraved rollers for Press for leather printing

(64) Evening and Roughing machine for Soles and Insolses

(65) Fibre Board Flexing machine

(66) Fine Turn machines for Lasts

(67) Finish Sheet Resistance Tester

(68) Finishing Machine for Lasts

(69) Fixed Head/Travailing Head Clicking Cutting machine

(70) Flat Bed Double Needle Sewing machine

(71) Flat Bed Single Needle Industrial Sewing machine with or without trimer

(72) Folding machine for brief cases and other leather products

(73) Folding machine for sides for Brief Case

(74) Forepart conditioning machine

(75) Frame Fixing/Frame Folding machine

(76) Fusing presses

(77) Halogen and Adhesive Application machine

(78) Hand Operated Press for Inserting Perforation Tubes and Prickers

(79) Heat Setting plant

(80) Heat transfer press

(81) Heel and Sole Brushing machine

(82) Heel and Sole Buffing machine

(83) Heel Attaching machine

(84) Heel Breast Cementing machine

(85) Heel breast roughing machine

(86) Heel Breasting machine

(87) Heel Building machine

(88) Heel Covering machine

(89) Heel Molder Flanger

(90) Heel Nailing machine

(91) Heel profiling machine

(92) Heel seat and side lasting machines

(93) Heel Seat Cement Lasting machine

(94) Heel Trimming / pretrimming / Cupping or combined machine

(95) High Speed Corner Stitching machine

(96) Hole punching machine

(97) Hot Melt Applicators

(98) Humidifier for Uppers

(99) Hydraulic / Pneumatic sammying and /or setting machine

(100) Hydraulic automatic plating ironing machine

(101) Hydraulic Bending machine

(102) Hydraulic Fleshing machine

(103) Hydraulic Ironing and Embossing Press

(104) Hydraulic Scudding machine

(105) Hydraulic Setting machine

(106) Hydraulic Shaving machine

(107) Hydraulic Shearing machine

(108) Hydraulic Splitting machine

(109) Hydraulic Sulphide applicator

(110) Injection Moulding of PVC/TPR Soles, Inserts and Half Soles

(111) Injection Moulding press to produce Plastic shoe Lasts

(112) Insole Attaching machine

(113) Insole Backpart Stiffener Tester

(114) Insole Bevelling machine

(115) Insole Covering machine

(116) Insole moulding machine

(117) Ironing and Conditioning machine

(118) Kamborian Lasting machine

(119) Knife Grinding machine

(120) Knife making equipment for cold steel and forged steel

(121) Label stitching machine

(122) Last Turning machine

(123) Lastometer

(124) Leather buffing machine

(125) Leather cover cutting machine for Heels

(126) Leather Polishing machine

(127) Leather rolling machine

(128) Lining roughing machine

(129) Lining Trimming machine

(130) Loop closing machine

(131) Loose / Nailing machine

 

 

(132) Manual loop cutter

(133) Mckay Stitching machine

(134) Milling machine for shoe Uppers

(135) Moccasin Lining Trimming machine

(136) Moccasin Performing machine

(137) Motorised hides and skins stamping machine

(138) Moulds for rubber sole direct vulcanising press and PVC direct injection soling machine

(139) Multiple Row Upper Chain Stitching machine i.e. 3 Rows and above

(140) Three Needles for Small Arm Cylinder machine for Multiple Row Stitching

(141) Outsole Stitching machine

(142) Paste drying unit

(143) Pattern binding machine

(144) Pattern corner cuting and binding machine

(145) Pattern Grading machine

(146) Pattern making machine

(147) Pattern Perforator

(148) Pattern Plan

(149) Pattern scanner

(150) Pattern Scanning machine

(151) Piping machine for trimming and embelishment fixing machine

(152) Plan Computer Controlled Nesting System

(153) Pneumatic Broaching machine

(154) Pneumatic control moulder machine for buckles

(155) Pneumatic fusing machine for ironing fusible interlining

(156) Polishing machine

(157) Polyshanking machine

(158) Polyurethane / PVC / TPR Sole, Insole, Heel, Heel Tip Injection Moulding machine (single or multiple station)

(159) Pore part lasting machine

(160) Post Bed Double Needle Sewing machine

(161) Post Bed Single Needle Sewing machine

(162) Post Bed Single Needle under Edge Trimming

(163) Pounding or beating or ironing machine or combination of such machines

(164) Pre-lasting conditioner

(165) Preparing and polishing machine

(166) Pulling Over and Cement Lasting machine

(167) Pulling Over Machine

(168) Punches for model room

(169) Punches of all varieties

(170) Punching and / or eyeletting machine

(171) PVC / PU direct injection soling machine (DIP construction)

(172) Quilting machine

(173) Raised Cord Sewing machine

(174) Reactivating Plant for Shoe and Soles

(175) Recessing and Roughing Soles machine

(176) Recessing Welt machine

(177) Rotary Collection Unit

(178) Rotary Pigment Coating machine

(179) Rotary Printing machine

(180) Rough Turn machine for lasts

(181) Roughing machine for Plastic Blocks

(182) Roughing machinery for upper or soles or insoles

(183) Rubber sole direct vulcanising press (DVP construction)

(184) Satra Plan and Knife search

(185) Scissors Cutting machine for plate

(186) Scouring and Blending machine

(187) Screwing machine

(188) Seam Ironing machine

(189) Sectioning machine

(190) Sewing machine Cylinder Bed

(191) Sewing Machine for Ruffled Work and Genuine Mocassin

(192) Sewing Machine Zig Zag Flat Bed

(193) Shank / Sole / Counter reducing machine

(194) Shank Rivetting machine

(195) Shears for cutting pattern

(196) Shears for Iron Bars

(197) Side Lasting machine

(198) Sidewall Roughing machine

(199) Skiving machine

(200) Slike Fastener Fatigue Tester

(201) Snap fasteners fixing machine with or without dies therefor

(202) Sole / Heel / Seat Roughing machine

(203) Sole Edge Recessing / Shapping machine

(204) Sole Levelling machine

(205) Sole Stamping / Embossing machine

(206) Soling Material Abrasion machine

(207) Spiral Cutting machine/ Cutting Press

 

(208) Spray Booths

(209) Stamping machine for Upper / Lining / Socks

(210) Steam Toe Press

(211) Stich Marking machine

(212) Strap / Strip Cutting machine

(213) Strap Folding machine

(214) Stretching and drying machine with or without conveyor and toggles

(215) String Lasting machine

(216) Strobel type stitching machine

(217) Studs Attaching machine

(218) Suit Case Stitching machine

(219) Tack heel seat lasting machine

(220) Tack Lasting machine

(221) Tack Side lasting machine

(222) Tanning and colouring drums

(223) Tapping and seam rubbing machine

(224) Testing Equipments, namely :- Flexometer / Upper material flexing machine, Tensometer / Lastometer, Permeometer / Upper leather water proofness tester, Penetrometer / Bottom Leather water penetration machine, Finish rub fastness tester, Upper leather abrasion resistance machine, Dome plasticity apparatus, Finish fleat resistance tester, Adhesion of finish tester, Leather shrinkage temperature determination apparatus, Wrinklometer, Bottom Leather grain crack tester, Electronic moisture meter, Dyeing and fumbling machine for laboratory, fibre board flexing machine, State of cure apparatus, Ross Flexing machines, Soling materials abrasion machine, Heel fatigue tester, Heel impact tester, Centilever tensiometer, Viewing box for assessing visible damage, Slide fastener fatigue tester, Insole backparts stiffness tester, shoe flexing machine, Break / pipness scale, Sole Adhesion tester, Safety Footwear impact tester, Rapid tear tester, Needle holding jig, Shoe lace adhesion machine

(225) Thermo cementing and folding machine

(226) Toe Cap Applicator Thermoplastic

(227) Top Lift Slugging machine (228) Transfer Arm

(229) Trimming/milling machine with or without polishing device

(230) Twin Needle, needle feedlock stitch sewing machine

(231) Twin Sole Attaching machine

(232) Two Needle Lock Stitching machine

(233) Unlasting machine

(234) Upper Cementing machine

(235) Upper Edge Inking machine

(236) Upper Embossing machine

(237) Upper Folding machine

(238) Upper Forming machine

(239) Upper Perforating machine

(240) Upper Reinforcing machine

(241) Upper Seam Rubbing / Beating machine

(242) Vaccum Drying machine

(243) Vaccum forming machine for last with vaccum pump

(244) Vice for holding pattern

(245) Vision Lasting System for Toe Lasting machine

(246) Vulcanizing Press

(247) Welt (Rand) Attaching machine

(248) Aquamix for use in Tanning industry

(249) Prodomix for use in Tanning industry

(250) Microtan / Computan for use in Tanning industry

(251) Pneumatic press for engraving and marking

(252) Pneumatic staple gun for stapling insoles, heels and uppers

(253) Stapling machine for lows to upper on leather shoes

(254) Lighting assessment cabinet (for checking colour under different light conditions)

(255) CAD/CAM equipment for shoe desgining and pattern engineering including software

(256) Bistep cutting machine

(257) Spiking machine

(258) Airhood with grinder

(259) Sock liner press

(260) Box folding machine

(261) Outsole plates

(262) Dust collector systems

(263) Shoe box making machine

(264) Splitting machine (fitted with electronic and computer devices, etc.)

(265) Moulds for leather footwear

List 35 (See S. No.283 of the Table)

(A) Wireless Apparatus and accessories -

(1) HF, VHF, or UHF transreceiver (combination of transmitter and receiver) meant for amateur frequencies with accessories in assembled or kit form

(2) VHF/VHF or VHF/UHF Repeater (combination of transmitter and receiver) meant for amateur frequencies with accessories in assembled or kit form

(3) Transvertor for amateur frequencies in assembled or kit form

(4) Grid Dip Oscillator, Radio Frequency Interference Filter, Balun Transformer, SWR bridge or reflectometer, Morse reader or Noise bridge

(5) Antenna with or without feeders/Antenna rotators for amateur frequencies

(6) Digital Frequency counter (upto 600 MHz) with accessories

(B) Parts -

(1) Transistors, diodes, integrated circuits/ chips, thermionic valves or vaccum tubes

(2) Toroidal cores, quartz crystals, relays, rotatory switches, ferrite beads

(3) Variable condensers, air-dielectric type

(4) Precision capacitors (fixed type) value (s) between 1pF to 5000 pF

(5) Spare nicad cells or pack, as required or used with thermionic valves or vaccum tubes or toroidal cores (in the case of hand held transreceiver)

(6) Slow motion tuning mechanism with or without dials.

List 36(See S. No 359 of the Table)

(1) Calorimeter for semen analysis

(2) Phase contrast microscope

(3) Photometer for semen analysis

(4) Ovucheck pregnancy detecting kit

(5) Freeze drier

(6) Tuberculin syringe

(7) Programmed biological freezer

(8) Automatic semen analyser

(9) Semen straws (French medium and mini)

(10) Sheath for French mini straws

(11) Cryo containers above 60 litres capacity

(12) Liquid nitrogen tankers above 500 litre capacity

List 37 (See S. No. 363 of the Table)

(1) Australia Antigen RIA kit

(2) Cardiac catheters with guidewires; Coronary Stents and coronary stent systems for use with cardiac catheters

(3) Clips for aneurysms and clips applying forceps in Neuro-Surgery

(4) Cardio vascular sutures, including sternum steel sutures

(5) Cardiovascular special instruments, namely:- (i) Coronary perfusion cannulae (ii) Electrical or gas operated sternal cutter (iii) High pressure stop cocks and connectors for pressure recording (iv) Vascular bull-dog clamps (v) Vascular clamps (vi) Vascular needle holders (vii) Vascular scissors straight or angled (viii) Vascular tissue forceps

(6) Compressed air breathing apparatus complete

(7) D.C. Defibrillators for internal use and pace makers

(8) Laryngeal Mask / Endotracheal Tube

(9) Haemodialysors

(10) Heart lung machine

(11) Heart valve prothesis including valve frames

(12) Nebulized humidifier

(13) Hydrocephalus shunts

(14) Hyper-baric oxygen chamber

(15) Fogarty and embolectomy catheters

(16) Implantable cardiac pacemakers

(17) Intra-arterial catheters and guidewires and material for intervention radiology

(18) Intra-cardiac patches

(19) Nebulizers (excluding ultrasonic nebulizers and heat nebulizers)

(20) Omayya reservoirs for intraventicular investigation / therapy

(21) Operating sets for Percutaneous Nephrostomy and Percutaneous removal of kidney stones with continuous irrigation and suction with ultrasonic Lithotrite, etc.

(22) Ostomy products (Appliances) for managing Colostomy, Illcostomy, Ureterostomy, Illeal Conduit Urostomy Stoma cases such as bags, belts, adhesives seals or discs or rolls adhesive remover, skin barriers micropore surgical tapes, bag closing clamps karaya seals paste or powder, irrigation sets, plastic or rubber faceplates, flanges, male or female urinary incontinency sets, skin gels, in parts or sets

(23) Oxygenator

(24) Plastic disposable 3-way connectors

(25) Portable intermittent positive, pressure breathing apparatus

(26) Pulmoflator

(27) Respirators including ventimeters

(28) Sengstaken tubes

(29) Tracheostomy tubes

(30) Ventilator used with anaesthesia apparatus

(31) Vascular grafts

(32) Tracheostomy tube of plain PVC, Low pressure PVC, Red Rubber Plain, and Red Rubber cuffed

(33) Various types of Cardiac Catheters including balloon tipped, double Lumen and PTCA catheters, balloon dilatation catheters and Endomyocardial biopsy forceps

(34) Disposable and non-disposable cannula for aorta, vena cavae and similar veins and blood vessels and cannula for intra-corporal spaces

(35) Programmer for pacemaker

(36) Ancillaries for blood component therapy required for the treatment of cancer, namely, Y type blood solution recipient set, Transfer pack 1000 ml. and 300 ml., disposable pherasis bowl 225 ml. and 373 ml., wasting harness with bypass, and waste bags

(37) AIDS (Acquired Immune Deficiency Syndrome) test kits, Enhanced luminescene analysers for AIDS, Hepatitis and other Analyses

(38) Iridium wire

(39) Anti-HLA sera (AB-CDR)

(40) T.P.H.A. Kits and AIDS diagnostic kits

(41) Gamma knife

(42) Bone Marrow Transplant Equipment including silastic long standing intravenous catheters for Chemotherapy

(43) Cell Separator

(44) Pressure Transducer and Pressure Amplifier

(45) Cell Saver

(46) Craniotome (Pneumatic and Electric Equipment) and Drills

(47) Binocular Loupes

(48) Intra Aortic Balloon Pump

(49) Remote After Loading Brachy Therapy Equipment

(51) Dosimetry System

(52) Cell Saver Equipment

(53) Cell Washer

(54) Thawer Equipment for Blood Warming

(55) Mammography Unit

(56) O2 Concentrator

(57) Ventricular Assist Device

(58) Pace Maker

(59) Activated Clot Time Machine

(60) Cobalt Therapy Unit

(61) Colour Doppler Ultrasound Scanner

(62) SPECT Gamma Camera

(63) Deep Therapy Unit

(64) Cardiac and Vascular Angiography System including Digital substraction Angiography

(65) Pulse Oximeter

(66) Blood Gas Analyser (including cartridges, if any), Sodium Potassium Analyser, Auto Analyser for enzymes, drug levels and bio-chemical investigations, or a combination of two or more of the aforesaid

(67) Ultrasonic Surgical Aspirator

(68) Intra Cranial Pressure Monitoring Equipment

(69) Radio Therapy Simulator

(70) Treatment Planning System

(71) Angiography Contrast Agent

(72) Image Intensifier

(73) Magnetic Resonance Imaging System

(74) Surgical Laser

(75) Electro Hydraulic Operating Table for Cardio Throacic and Neuro Surgery

(76) Implants for pain relief and bladder control

(77) Artificial electronics larynx instruments

(78) Ventilators other than those used with anaesthesia

(79) Digital Video EEG System

(80) Instruments and implants for severely physically handicapped patients and joints replacement and spinal instruments and implants including bone cement

(81) Small portable pumps used for giving slow infusion of anti-cancer drugs or thalassaemic drugs

(82) Fibre optic endoscopes including , Paediatric resectoscope / audit resectoscope, Peritoneoscopes, Arthoscope, Microlaryngoscope, Fibreoptic Flexible Nasal Pharyngo Bronchoscope, Fibreoptic Flexible Laryngo Brochoscope , Video Laryngo Brochoscope and Video Oesophago Gastroscope, Stroboscope, Fibreoptic Flexible Oesophago Gastroscope.

     

List 38 (See S. No. 367 of the Table)

Ophthalmic equipment, namely :-

(1) Ophthalmoscope-Direct/Indirect (2) Ophthalmic/Xenon Arc

(3) Flurescein Angiography Equipment including Fundus Camera (4) Ultrasonic Equipment (A scan/ Pacchy meter) (5) Microsurgical needles, cannulas, blades, trephine blades, membrane peelers, diathermy probes, vitreous cutters, atraumatic needles and sutures, intraocular scissors and forceps (6) Tonometer (Schiotz/ Applanation / Pneumo) (7) Retinoscope streak/ spot (8) Operating glasses (2X, 4X, 6X)/ Binomag (9) Gonioscope, 3 mirror lens, special lenses for laser delivery, special diagnostic lenses (14D, 20D, 90D), Endo lens

(10) Sterilisers (high speed / ethylene) (11) Specular microscope with monitor and recorder

(12) Intraocular lenses/ Keratoprosthesis / orbital implants (13) Diathermy equipment (14) Synoptophore (15) Silicone Sponges/ rubber / bands, for Retinal Detachment Surgery (16) Vitrectomy equipment (17) Phaco-emulsification system (18) Visual field recording equipment (19) Ocular electro physiological testing equipment [Electroretinography / Electroculography / Visually evoked response equipment (ERG/EOG and VER)]

(20) Keratometer / Automatic Keratometer (21) Prism bars (22) Laser Interferometer (23) Pacchymeter - optical / electronic (24) Aspiration - irrigation equipment

(25) Automatic refractometer or lensometer / projection lensometer or a combination of the aforesaid (26) Complete refraction unit with phoropter / projection - chart (27) Ophthalmic hydraulic chair (28) Low visual aids and sets (telescopic glasses) (29) Colour vision testing equipment (30) Photoelectric keratoscope and thermokeratoscope (31) Pseudo-isochromatic chart book / Ishiare

(32) Slit lamp biomicroscope / photo slit lamp (33) Surgical operating zoom microscope with closed circuit TV camera (34) Surgical operating microscope manual (35) Argon / krypton laser (36) Yag laser, excimer laser or diode laser

List 39 (See S. No.368 of the Table)

ENT equipment, namely :-

(1) Otoscope

(2) Impedance Audiometer

(3) BERA (Brain Evoked Response Audiometry)

(4) Speech Audiometer

(5) Surgical Operating Microscope

(6) Fresnel’s glasses

(7) Magnifying Operating Glasses (Magnifying Loupes)

(8) Microsurgical instruments for all Ear surgeries

(9) Sialistic sheet used for Tympanoplasty operations

 

(10) Sinoscopes 00 , 300 , 700 , 1200 (2.6 mm and 4 mm diameter)

(11) Instruments for Endoscopic Sinus Surgery

(12) CCD Camera, Monitor, VCR to fit with Sinoscopes

(13) Cochlear Implants and equipment for performing Cochlear

(14) Voice Prostheses

(15) Blom Singer Voice Prostheses

(16) Electronic Larynx

(17) Sigel’s Speculum

(18) Microlaryngeal instruments

(19) Video Processor

(20) Video Cassette Recorders used along with the Video Endoscope

(21) ENT Burrs

List 40 (See S. No. 369 of the Table)

(1) 12 (+/- 1) mm Laparoscope (Single incision)

(2) Falope Ring - applicator single incision (for two rings) and procedure instruction manual, kit containing guide and loader and cleaning brush

(3) 12 (+/- 1) mm Trocar (including piston type) with spare washers for sleeve and canulae and cleaning brush

(4) Fibre Optic Light Cable

(5) Bulbs, fuse lamps, Adapter for Fibre Optic Light Cable/Laparoscope

(6) Carbondioxide (CO2) cylinder with pneumoperitoneum apparatus

(7) Light Source

(8) Machine for Gas Insufflator with Gas Tubing Spare Carbondioxide (CO2) Hose Pipe and a Gauge

(9) Dual incision applicator Two rings

(10) Trocal and Cannula 6-8 mm with valves gas stopcock

(11) Probe 34-37 cm

(12) Verres Needle (4" and 51/2")

(13) Minilight source with accessories consisting of :-

(a) 6 volts rechargeable battery

(b) AC battery charger

(c) AC power supplier 220 volts

(d) Inter-connection assembly

(e) Convertor

(14) Falope Rings

(15) 6-8 mm Laparoscope (double puncture)

(16) Scissors 34-37 cm

(17) Suction Cannula 34-37 cm

 

Notes:-

(A) Item Nos.(6), (7) and (8) may be imported separately or in combinations as dual control assembly.

(B) Item Nos. (1) and (2) may be separate or in combination, when in combination, it is called Laparocator.

 

List 41 (See S. No. 370 of the Table)

(A) (1) Braille writers and braille writing instruments

(2) Hand writing equipment Braille Frames, Slates, Writing Guides, Script Writing Guides, Styli, Braille Erasers

(3) Canes, Electronic aids like the Sonic Guide

(4) Optical, Environmental Sensors

(5) Arithmetic aids like the Taylor Frame (arithmetic and algebra types), Cubarythm, Speaking or Braille calculator

(6) Geometrical aids like combined Graph and Mathematical Demonstration Board, Braille Protractors, Scales, Compasses and Spar Wheels

 

(7) Electronic measuring equipment, such as calipers, micrometers, comparators, gauges, gauge blocks Levels, Rules, Rulers and Yardsticks

(8) Drafting, Drawing aids, tactile displays

(9) Specially adapted clocks and watches

(B) (1) Orthopaedic appliances falling under heading No.90.21 of the First Schedule

(2) Wheel chairs falling under heading No. 87.13 of the First Schedule

(C) Artificial electronic larynx and spares thereof

(D) Artificial electronic ear (Cochlear implant)

List 42 (See S. No. 400 of the Table)

Thermal Projects :

  1. Kahalgaon Stage II – 1500 MW

  2. North Karanpura STPP– 2000 MW

  3. Barh STPP – 2000 MW

  4. Cheyyur – 1500 MW

  5. Hirma – 3960 MW

  6. Krishnapattanam – 1500 MW

  7. Pipavav – 2000 MW

 

  • Maithon-1000 MW

  • Anta-1300 MW

  • Kawas – 1300 MW

  • Auraiya-1300 MW

  • Gandhar-1300 MW

  • Cuddalore-1000 MW

  • Narmada-1000 MW

Hydel Projects :

  1. Koel-Karo (Jharkhand ) – 710 MW

  2. Teesta-V (Sikkim) – 510 MW

  3. Koldam (Himachal Pradesh)– 800 MW

  4. Parvati (Himachal Pradesh) – 800 MW

List 43 (See S. No. 401 of the Table)

  1. Tarapur Atomic Power Plants –3 and 4 (Maharashtra) – 1000 MW

  2. Kudankulam (Tamil Nadu) – 2000 MW

  3. Kaiga – 3 and 4 (Karnataka) – 440 MW

T.R.Rustagi
Joint Secretary to the Government of India

F.No 334/1/2002-TRU